New Zealand Gazette – 1976 – No. 18

Page 387

✨ Tariff Exclusion Applications



19 FEBRUARY THE NEW ZEALAND GAZETTE 387

Tariff Notice No. 1976/20—Applications for Exclusion from Determination

NOTICE is hereby given that applications have been made for exclusion of goods as follows from current determinations of the Minister of Customs and for admission of such goods at the rate of duty prescribed under the substantive Tariff item therefor:

Appn. No. Tariff Item Goods Rates of Duty Part II Ref.
Normal
B.P.
Other Pref.
31870 84.45.021 Punch press, Rotex Turret model 18C -2.25, hand operated 45%* 45%*
31881 84.45.021 Tube bending machine, Langley SB60, for producing multi-plane bends in tubes up to 57.15 mm (2¼ in.) × 16 s.w.g. 45%* 45%*
31586 84.45.021 Trumpf curve cutting out and nibbling machine, model TAS 402 45%* 45%*
31596 84.45.021 Trumpf trumatic, numerically controlled sheet metal machining center, model 202 W, maximum punching capacity 20 tonnes 45%* 45%*
31597 84.45.021 Trumpf punching and copy nibbler, model CN 901 E, maximum punching capacity 7.4 tonnes 45%* 45%*
31598 84.45.021 Trumpf copy punch press, model CS 75, maximum punching force 7.5 tonnes 45%* 45%*
31599 84.45.021 Trumpf Sunimat, precision punching and contour nibbling machine model 400, maximum punching force 15.2 tonnes 45%* 45%*
31600 84.45.021 Trumpf trumatic, numerically controlled sheet metal machining center, model 202, maximum punching capacity 20 tonnes 45%* 45%*
31601 84.45.021 Trumpf trumatic, numerically controlled punching and nibbling machine, models 150K and 150W, maximum punching capacity 17.5 tonnes 45%* 45%*
31602 84.45.021 Trumpf copy and co-ordinate nibbling machine, models H CN and CN 1200, maximum nibbling capacity 12 mm 45%* 45%*
31605 84.45.021 Trumpf copy and co-ordinate nibbling machine, models HCN and CN 901, maximum nibbling capacity 6 mm 45%* 45%*
31603 84.45.021 Trumpf copy and co-ordinate nibbling machine, models HCN 701 and CN 701, maximum nibbling capacity of 5 mm 45%* 45%*
31607 84.45.021 Trumpf copy and co-ordinate nibbling machine, model CN 500, maximum nibbling capacity of 3 mm 45%* 45%*
31608 84.45.021 Trumpf curve cutting out and nibbling shears, model TAS 701, maximum shearing capacity 7 mm 45%* 45%*
31609 84.45.021 Trumpf curve cutting out and nibbling shears, model TAS 901, maximum shearing capacity 9 mm 45%* 45%*
31610 84.45.021 Trumpf curve cutting out and nibbling shears, model TAS 500, maximum shearing capacity 5 mm 45%* 45%*

*or such lower rate of duty as the Minister may in any case direct

Any person wishing to lodge an objection to the granting of these applications should do so in writing on or before 11 March 1976. Submissions should include a reference to the application number, Tariff item and description of goods concerned, be addressed to the Comptroller of Customs, Private Bag, Wellington, and supported by information as to:

(a) The range of equivalent goods manufactured locally;
(b) The proportion of New Zealand and imported materials used in manufacture;
(c) Present and potential output; and
(d) Details of factory cost in terms of materials, labour, overhead, etc.

Dated at Wellington this 19th day of February 1976.

J. A. KEAN, Comptroller of Customs.



Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa — PDF NZ Gazette 1976, No 18


NZLII — PDF NZ Gazette 1976, No 18




✨ LLM interpretation of page content

🏭 Applications for Exclusion from Tariff Determination

🏭 Trade, Customs & Industry
19 February 1976
Tariff, Exclusion Applications, Customs, Duty Rates, Objections
  • J. A. Kean, Comptroller of Customs