2890

THE NEW ZEALAND GAZETTE
No. 108

Local Authority and Name of Loan
Christchurch Drainage Board:
Renewal Loan No. 8, 1975
Renewal Loan No. 7, 1975
Dunedin City Council:
Development Loan No. 28, 1975
East Otago Pest Destruction Board:
Housing Loan No. 1, 1975
Eltham Borough Council:
Water Supply Improvement No. 2 Loan 1975
Grey County Council:
Fire Appliance Loan 1975
Hawera Borough Council:
Water Improvements Loan 1975
Lower Hutt City Council:
Streets Reconstruction Loan 1975
Lyttelton Borough Council:
Waterworks Extension Redemption Loan 1975
Manukau City Council:
Renewal Loan No. 4, 1975
Mount Albert Borough Council:
Depot Improvements Loan 1975
One Tree Hill Borough Council:
Sanitary Sewer Reticulation Redemption Loan No. 9, 1975
Pahiatua County Council:
Rural Housing Loan 1974
Riverton Borough Council:
Municipal Buildings Renewal Loan 1975
Taranaki Harbours Board:
Redemption Loan No. 5, 1975
Taringatura Pest Destruction Board:
Staff Housing Loan 1975
Taupo County Council:
Rangitaiki Afforestation Loan 1975
Tauranga City Council:
Streets Loan 1975
Electricity Generation Additional Loan 1975
Tauranga Electric Power Board:
Electricity Generation Additional Loan 1975
Waikato Vailey Authority:
Staff Housing Loan 1975
Wellington City Council:
Renewal Loan No. 6, 1975

Amount Consented to $
151,300
58,000
600,000
30,000
50,000
8,000
215,000
365,000
31,500
117,000
40,000
15,500
50,000
9,000
460,000
20,000
244,000
750,000
250,000
250,000
25,000
149,800

The Standards Act 1965—Standard Specifications Revoked
Pursuant to section 23 of the Standards Act 1965, the Standards Council, on 21 November 1975, revoked the under-mentioned standard specifications:

Number and Title of Specification
NZS 31:1964 (BS 251:1963) Naval brass rods, sections, forging stock and forgings.
NZS 32:1964 (BS 252:1963) Naval brass (special mixture) rods and sections (other than forging stock).
NZS 49:1964 (BS 249:1963) Leaded brass (58 percent copper, 3 percent lead) rods and sections (other than forging stock).
NZS 421:1964 (BS 384:1963) Phosphor bronze (copper-tin-phosphorus) wire.
NZS 669:1965 (BS 1224:1965) Electroplated coatings of nickel and chromium.
NZS 746:1950 (BS 1367:1947) Code of procedure in inspection of copper base alloy sand castings.
NZS 825:1962 (BS 1400:1961) Schedule of copper alloy ingots and copper and copper alloy castings.
NZS 835:1967 (BS 1569:1965) Copper sheet and strip for roofing and other building purposes.
NZS 847:1957 (BS 1004:1955) Zinc alloys for die casting and zinc alloy die castings.
NZS 858:1964 (BS 1541:1963) Rolled copper and copper alloy plate for heat exchanger and condenser tube plates.
NZS 870:1967 (BS 1615:1961) Anodic oxidation coatings on aluminium.
NZS 881:1964 (BS 369:1963) 5 percent phosphor bronze (copper-tin-phosphorus) rods and sections (other than forging stock).
NZS 916:1951 Electro-deposited metal coatings of copper, tin and lead.
NZS 936-51:1951 (AS O 10-0 45:1948) Grading rules for Jarrah, Karri and Wandoo.
NZS 1053:1952 Lead pipes (for other than chemical purposes).
NZS 1149:1953 (BS 1867:1952) Solid drawn aluminium bronze tubes for general purposes (7 percent aluminium).
NZS 1179:1964 (BS 1949:1963) 60/40 brass rods, sections, forging stock and forgings.
NZS 1232:1954 (BS 2027:1953) Copper plates for general purposes.
NZS 1418:1964 (BS 1470:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Sheet and strip.
NZS 1419:1964 (BS 1471:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Drawn tube.
NZS 1420:1964 (BS 1472:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Forging stock and forgings.
NZS 1421:1964 (BS 1473:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Rivet, bolt and screw stock for forging.
NZS 1422:1964 (BS 1474:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Extruded round tube and hollow sections.
NZS 1424:1964 (BS 1476:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Bars and sections.
NZS 1425:1964 (BS 1477:1963) Wrought aluminium and aluminium alloys for general engineering purposes. Plate.
NZS 1569:1964 (BS 2870:1962) Schedule of rolled copper and copper alloys. Sheet, strip and foil.
NZS 1697:1962 (BS 1001:1960) High tensile brass forging stock and forgings.
NZS 1805:1963 (BS 2614:1959) Aluminium alloy sections for marine purposes.
NZS 1835:1963 (BS 2872:1962) Schedule of copper and copper alloys. Forging stock and forgings.
NZS 1836:1963 (BS 2874:1962) Schedule of copper and copper alloys. Rods and sections (other than forging stock).
NZS 1901:1964 (BS 1948:1963) Copper-silicon rods, sections, forging stock and forgings.
NZS 1902:1964 (BS 2873:1963) Schedule of copper and copper alloys. Wire.
NZS 1903:1964 (BS 2875:1963) Schedule of wrought copper and copper alloys. Plate.
NZS 2214:1968 (BS 2604:1963) Resin-bonded wood particle board.

The Standards Act 1965—Specification Declared to be a Standard Specification
Pursuant to section 23 of the Standards Act 1965, the Standards Council, on 24 October 1975, declared the under-mentioned specification to be a standard specification:
Number, Title, and Price of Specification (Mailed)
NZS 4202:1975 Methods of measurement of building works. Metric units. $3.40.

Copies of the standard specification are available from the Standards Association of New Zealand, World Trade Center, 15–23 Sturdee Street (or Private Bag), Wellington.
Dated at Wellington this 26th day of November 1975.
G. H. EDWARDS, Director,
Standards Association of New Zealand.
(S.A. 1–114/2/2: 575)

The Standards Act 1965—Specification Declared to be a Standard Specification
Pursuant to section 23 of the Standards Act 1965, the Standards Council, on 21 November 1975, declared the under-mentioned specification to be a standard specification:
Number, Title, and Price of Specification (Mailed)
NZS 3608:1975 (BS 2604: Part 2: 1970) Resin-bonded wood particle board. Metric units. $5.80. Including Amendments: No. 1 (AMD 809, 65c); No. 2 (AMD 906, 65c); No. 3 (AMD 1281, 65c); and No. 3A.

Copies of the standard specification are available from the Standards Association of New Zealand, World Trade Center, 15–23 Sturdee Street (or Private Bag), Wellington.
Dated at Wellington this 26th day of November 1975.
G. H. EDWARDS, Director,
Standards Association of New Zealand.
(S.A. 2–114/2/2: 574)

Dated at Wellington this 28th day of November 1975.
S. A. McLEOD, Assistant Secretary to the Treasury.
(T. 40/416/6)

Dated at Wellington this 26th day of November 1975.
G. H. EDWARDS, Director,
Standards Association of New Zealand.
(S.A. 3–114/2/7: 839–72)