✨ Tariff Applications
9 JANUARY
THE NEW ZEALAND GAZETTE
35
Tariff Notice No. 1975/1—Applications for Approval
NOTICE is hereby given that applications have been made to the Minister of Customs for concessionary entry of the following goods at the rates of Customs duty shown:
| Appn. | Tariff Item | Goods | Rates of Duty | Part II Ref. |
|---|---|---|---|---|
| No. | Normal | B.P. | ||
| 21159 | 23.07.009 | Chlortetracycline feed grade antibiotic, used for the manufacture of stock and poultry foods | Free* | Free* |
| 21129 | 34.02.000 | Oakite fleetline 111, a heavy duty detergent for cleaning aircraft .. | Free* | Free* |
| 21185 | 34.02.000 | 12.5% solution of dioctyl ester of sulpho succinic acid in water with a trace of commercial perfume, for cleaning optical lenses | Free* | Free* |
| 21239 | 34.02.000 | Toximul AP, an anionic-nonionic emulsifier, used for pesticide formulations | Free* | Free* |
| 21132 | 35.06.001 | Resorcinol formaldehyde glue: viz, Kauresen 440 and 457 hardeners, used for the utilisation of timber by finger jointing and manufacture of glue laminated timber beams | Free | Free |
| 21240 | 39.01.022 | Resin ERL 4221, a stabiliser for Diazinon | Free* | Free* |
| 20803 | 73.15.249 | Circles, with or without centre holes, cut from still plate, used for the manufacture of saw blades for cutting concrete | Free* | Free* |
| 21119 | 73.15.291 | Alloy steel and high carbon steel, etc: | Free* | Free* |
| Sheets and plates, etc: | ||||
| Of alloy steel: | ||||
| Other kinds: | ||||
| Polished | ||||
| 21123 | 73.27.039 | Stainless steel mesh, used in the manufacturing and construction industries, etc | Free* | Free* |
| 21174 | 73.40.497 | Schneebebi tree bicycle, used for collecting seeds from mature trees without damaging the bark, and for climbing | Free* | Free* |
| 21179 | 74.04.012 | 1.62 mm × 33 mm and 1.62 mm × 30 mm brass strip, used for the manufacture of pins for moulding on electric plugs | Free* | Free* |
| 17114 | 83.01.018 | Suitcase locks .. | Free* | Free* |
| 21220 | 84.10.009 | Grouting pump, hand generated with 76.2 mm diameter piston and 101.6 mm stroke, capable of a working pressure of 1.034 MPa and has an output at 60 strokes per minute of 27 litres per minute | Free* | Free* |
| 21114 | 84.15.219 | Upright biological storage freezer, to be used for the storage of biological samples at low temperatures for long periods of time | Free* | Free* |
| 21111 | 84.16.009 | Hydraulic sammying press, used for the sammying of all kinds of vegetably tanned or chrome tanned leather | Free* | Free* |
| 21113 | 84.17.129 | Freeze-dryer and manifold assembly, used for preparation of hormone solution | Free* | Free* |
| 18869 | 84.21.009 | Airless paint spraying outfits (excluding compressors) .. | Free* | Free* |
| 18869 | 84.21.009 | Portable paint spraying outfits (excluding motors), other than airless | Free* | Free* |
| 21137 | 84.22.028 | FN Hopper loaders, used for carrying and supplying pellets and powders mixed with pigments and other additives for plastic moulding machines | Free* | Free* |
| 21112 | 84.22.028 | Side conveyors with a bonded belt rib and angle adjustment between 20° and 45°, used for conveyance of spool runners from moulding machines | Free* | Free* |
| 20091 | 84.43.009 | Ingot moulds .. | Free* | Free* |
| 21064 | 84.45.009 | Ficep model 32V and 32 Beton shear and bender, for use in the engineering industry | Free* | Free* |
| 21164 | 84.45.029 | Nova Major and Super Brown cut-off machines, used for cutting solid bars, tubes and shapes of metal | Free* | Free* |
| 21165 | 84.45.029 | Tauring model Alfa 40-RV bar, pipe and bending machine, used for the manufacture of furniture | Free* | Free* |
| 21168 | 84.54.021 | Postage stamp affixer without calculating device, used to position and fix postal stamps upon envelopes, purchased in bulk | Free* | Free* |
| 21152 | 84.63.049 | Borg-Warner agricultural gear boxes | Free* | Free* |
| 21153 | 84.63.049 | Gears, reduction (EXCLUDING co-axial gears, designed for input 0.37 to 7.46 kW with output r.p.m. from 12–611): | Free* | Free* |
| (i) With two or more reductions | ||||
| EXCLUDING: | ||||
| (a) Worm types | ||||
| (b) Single helical, double reduction shaft mounted types | ||||
| (c) Spur and helical parallel axis reduction boxes designed for 0.37 to 3.73 kW | ||||
| (ii) Single helical types for transmitting powers exceeding 14.91 kW | ||||
| EXCLUDING: | ||||
| (a) Double reduction shaft mounted types | ||||
| (iii) Double helical types | ||||
| (iv) Worm types, in which the shortest distance between the axies of the input and output shafts exceeds 20.95 cm |
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1975, No 1
NZLII —
NZ Gazette 1975, No 1
✨ LLM interpretation of page content
🏭
Tariff Decision List No. 56
(continued from previous page)
🏭 Trade, Customs & Industry9 January 1975
Tariff, Customs, Duty Rates, Goods, Approvals