618

THE NEW ZEALAND GAZETTE

No. 30

FIRST SCHEDULE—continued
EXEMPTIONS CREATED--continued

Class of Goods

Tariff Items
Asbestos millboard.
68.13.001
Ferro alloys.
73.02.100 }
73.02.200 }
Bars and rods, of iron or steel, hot-rolled, forged, extruded, cold-formed or cold-finished (excluding wire rod of 5 to 7/0 gauge in diameter; rounds (including deformed bars but excluding wire rods) ¼ in., to 1½ in. diameter inclusive; flats, viz: 1 in. to 1¾ in. wide by 3/16 in. to ¼ in. thick (but not including wrought iron flats 1¼ in. by 5/16 in.), and 2 in., Ex 73.10.100 }
Ex 73.10.201 } 2½ in., 3 in., 3½ in., and 4 in. wide by ¼ in. to ½ in. thick); hollow mining drill steel.
Ex 73.10.209 }
Cold drawn bright steel bar.
Ex 73.10.201 }
Ex 73.10.209 }
Angles, shapes and sections, including sheet piling, of iron or steel (excluding: unworked cold-formed, or cold-finished products; weather-seal of Tariff items 73.11.121 and 73.11.141; “Klip-lok” and similar roofing and decking; taper flange joists, viz: 3 in. by 2 in., 4 in. by 1¼ in. and 2½ in.; equal angles, viz: 1 in. to 1½ in. by 3/16 in. and ¼ in., 2 in. by 3/16 in., 2 in. by ¼ in., 2 in. by 5/16 in., 2 in. by ⅜ in., 2½ in. by ¼ in., 2½ in. by 5/16 in., 2½ in. by ⅜ in., 3 in. by ¼ in., 3 in. by 5/16 in., 3 in. by ⅜ in., 3 in. by ½ in., 3½ in. by ¼ in., 3½ in. by 5/16 in., 3½ in. by ⅜ in., 3½ in. by ½ in.; channels, viz: 2 in. by 1 in., 3 in. by 1½ in., 4 in. by 2 in., 5 in. by 2½ in., 6 in. by 3 in.; unequal angles, viz: 3 in. by Ex 73.11.001 to 2 in. by ¼ in.; 3 in. by 2 in. by 5/16 in.; 3 in. by 2 in. by ⅜ in.; 3½ in. by 2½ in. by ¼ in., 5/16 in., 3½ in. by ⅜ in., 3½ in. by ½ in.; “Y” section, fence standards and “Y” Ex 73.11.159 section for fabrication into fence standards).
Chain, welded, and parts thereof, made of iron or steel (other than conveyor chain; knotted link chain, including dog Ex 73.29.002 } chain).
Ex 73.29.009 }
Vehicle tyre chain.
Ex 73.40.498
Spray units for printing presses.
Ex 84.21.009
Typewriters; cheque-writing machines; calculating machines; accounting machines, cash registers, ticket-issuing machines and similar machines (excluding postage-franking machines), incorporating a calculating device; automatic data processing machines and units thereof; magnetic and optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included; other office machines (excluding paper-shredding machines, and hand-shear guillotines).
Ex 84.51.001 to
84.52.003
Earphones or headphones.
84.52.005 to Microphones and stands therefor.
84.54.019 Tapes, wires, strips, and like articles of a kind commonly used for sound or similar recordings on declaration by a manufacturer that they will be used only in the recording of tapes or in the manufacture of gramophone records.
Ex 84.54.021 Pickup cartridges suited for use in record players.
Ex 84.54.029 Billiard balls.
Ex 85.13.019
85.14.001 Pool balls, snooker balls.
Ex 92.12.029 Indoor bowls.
Cricket bats.
Ex 92.13.019
97.04.006 Outdoor bowls.
97.04.039 Hockey sticks and parts thereof.
Ex 97.04.099
97.06.061 }
Ex 97.06.069 }
Ex 97.06.099
97.06.071 }
Ex 97.06.099 }

SECOND SCHEDULE

EXEMPTIONS WITHDRAWN

Classes of Goods

Date of Exempting
Notice

Tariff Items
Capacity measures of iron or steel, copper, aluminium, glass or wood
44.28.002
23 December 1971
Ex 70.13.009 (Gazette, 13 January 1972)
Ex 73.38.101 to Asbestos millboard exceeding ¼ in. in thickness and capable of withstanding temperatures over
Ex 73.38.109 1,000°F
73.40.423
23 December 1971
Ex 74.18.009 (Gazette, 13 January
74.19.011 1972)
Ex 76.15.003 Bars and rods, of iron or steel, hot-rolled, forged, extruded, cold-formed or cold-finished
76.16.013 (excluding: wire rod of 5 to 7/0 gauge in diameter; rounds (including deformed bars but
Ex 68.13.001 excluding wire rods) ¼ in., to 1½ in. diameter inclusive; flats, viz: 1 in. to 1¾ in. wide by 3/16 in. to ½ in. thick, and 2 in., 2½ in., 3 in., 3½ in. and 4 in. wide by ¼ in. to ½ in. thick); hollow
Ex 73.10.100 }
Ex 73.10.201 } mining drill steel
Ex 73.10.209 }
Cold drawn bright steel bar
Ex 73.10.201 }
Ex 73.10.209 }
Angles, shapes and sections, including sheet piling, of iron or steel (excluding: unworked cold-
Ex 73.11.001 to formed, or cold-finished products; weather-seal of Tariff items 73.11.121 and 73.11.141;
Ex 73.11.159 “Klip-lok” and similar roofing and decking; taper flange joists, viz: 3 in. by 2 in., 4 in. by 1¼ in. and 2½ in.; equal angles, viz: 1 in. to 1½ in. by 3/16 in. and ¼ in., 2 in. by 3/16 in.,
2 in. by ¼ in., 2 in. by 5/16 in., 2 in. by ⅜ in., 2½ in. by ¼ in., 2½ in. by 5/16 in., 2½ in. by ⅜ in., 3 in. by ¼ in., 3 in. by 5/16 in., 3 in. by ⅜ in., 3 in. by ½ in., 3½ in. by ¼ in., 3½ in. by 5/16 in., 3½ in. by ⅜ in., 3½ in. by ½ in.; channels, viz: 2 in. by 1 in., 3 in. by 1½ in., 4 in. by 2 in., 5 in. by 2½ in., 6 in. by 3 in.; unequal angles, viz: 3 in. by 2 in. by ¼ in.; 3 in. by 2 in. by 5/16 in.; 3 in. by 2 in. by ⅜ in.; 3½ in. by 2½ in. by ¼ in., 5/16 in., 3½ in. by ⅜ in., 3½ in. by ½ in.; “Y” section fence standards and “Y” section for fabrication into fence standards)
16 February 1973
(Gazette, 5 April 1973)
Chain, welded, and parts thereof, made of iron and steel in excess of 1 inch in diameter
Ex 73.29.002 }
Ex 73.29.009 } 23 December 1971
(Gazette, 13 January 1972)