5 APRIL

THE NEW ZEALAND GAZETTE

FIRST SCHEDULE
EXEMPTIONS CREATED

Classes of Goods

Tariff Items
Ex 73.10.100 \ Bars and rods, of iron or steel, hot-rolled, forged, extruded, cold formed or cold-finished (excluding: wire rod of 5 to 7/0
Ex 73.10.201 \ gauge in diameter; rounds (including deformed bars but excluding wire rods) ¼ in., to 1½ in. diameter inclusive; flats, viz:
Ex 73.10.209 \ 1 in. to 1¾ in. wide by ³⁄₁₆ in. to ½ in. thick, and 2 in., 2½ in., 3 in., 3½ in. and 4 in. wide by ¼ in. thick); hollow mining
drill steel
Ex 73.10.201 \ Cold drawn bright steel bar
Ex 73.10.209 \ Angles, shapes and sections, including sheet piling, of iron or steel (excluding: unworked cold-formed, or cold-finished
Ex 73.11.001 to \ products; weather-seal of Tariff items 73.11.121 and 73.11.141; “Klip-lok” and similar roofing and decking; taper flange
Ex 73.11.159 \ joists, viz: 3 in. by 2 in., 4 in. by 1¾ in. and 2½ in.; equal angles, viz: 1 in. to 1½ in. by ³⁄₁₆ in. and ¼ in., 2 in. by ³⁄₁₆ in.,
\ 2 in. by ¼ in., 2 in. by ⁵⁄₁₆ in., 2 in. by ⅜ in., 2½ in. by ¼ in., 2½ in. by ⁵⁄₁₆ in., 2½ in. by ⅜ in., 3 in. by ¼ in., 3 in. by ⁵⁄₁₆ in.,
\ 3 in. by ⅜ in., 3 in. by ½ in., 3½ in. by ¼ in., 3½ in. by ⁵⁄₁₆ in., 3½ in. by ⅜ in., 3½ in. by ¼ in.; channels, viz: 2 in. by 1 in.,
\ 3 in. by 1½ in., 4 in. by 2 in., 5 in. by 2½ in., 6 ins by 3 in.; unequal angles, viz: 3 in. by 2 in. by ¼ in.; 3 in. by 2 in.
\ by ⁵⁄₁₆ in.; 3 in. by 2 in. by ⅜ in.; 3½ in. by 2½ in. by ¼ in., ⁵⁄₁₆ in., or ⅜ in.; 3½ in. by 3 in. by ¼ in., ⁵⁄₁₆ in., or ⅜ in.; 4 in. by
\ 3 in. by ¼ in., ⁵⁄₁₆ in., ⅜ in. or ½ in.; “Y” section fence standards and “Y” section for fabrication into fence standards)

SECOND SCHEDULE
EXEMPTIONS WITHDRAWN

Tariff Items
Ex 73.10.100 \ Bars and rods, of iron or steel, hot-rolled, forged, extruded,cold formed or cold-finished
Ex 73.10.200 \ (excluding: wire rod of 5 to 7/0 gauge in diameter; rounds (including deformed bars
\ but excluding wire rods) ¼ in., to 1½ in. diameter inclusive; flats; viz: 1 in. to 1¾ in.
\ wide by ⅛ in. to ½ in. thick, and 2 in., 2½ in., 3 in., 3½ in. and 4 in. wide by ¼ in. to
\ ½ in. thick); hollow mining drill steel
Ex 73.10.200 \ Cold drawn bright steel bar
Ex 73.11.001 to \ Angles, shapes and sections, including sheet piling, of iron or steel (excluding:
Ex 73.11.159 \ unworked cold-formed, or cold-finished products; weather-seal of Tariff items
\ 73.11.121 and 73.11.141; “Klip-lok” and similar roofing and decking; taper flange
\ joists, viz: 3 in. by 2 in., 4 in. by 1¾ in. and 2½ in.; equal angles, viz: 1 in. to 1½ in. by
\ ³⁄₁₆ in. and ¼ in., 1 in. to 2 in. by ⅛ in.; 2 in. by ³⁄₁₆ in. 2 in. by ¼ in., 2 in. by ⁵⁄₁₆ in.,
\ 2 in. by ⅜ in., 2 in by ¼ in., 2½ in. by ⁵⁄₁₆ in., 2½ in. by ⅜ in., 3 in. by ¼ in., 3 in. by ⁵⁄₁₆ in.,
\ 3 in. by ⅜ in., 3 in. by ½ in., 3½ in. by ¼ in., 3½ in. by ⁵⁄₁₆ in., 3½ in. by ⅜ in., 3½ in. by
\ ½ in.; channels, viz: 2 in. by 1 in., 3 in. by 1½ in., 4 in. by 2 in., 5 in. by 2½ in., 6 in.
\ by 3 in.; unequal angles, viz: 3 in. by 2 in. by ¼ in.; 3 in. by 2 in. by ⁵⁄₁₆ in.; 3 in. by
\ 2 in. by ⅜ in.; 3½ in. by 2½ in. by ¼ in.; ⁵⁄₁₆ in.; or ⅜ in.; 3½ in. by 3 in. by ¼ in., ⁵⁄₁₆ in.,
\ or ⅜ in.; 4 in. by 3 in. by ¼ in., ⁵⁄₁₆ in., ⅜ in. or ½ in.; “Y” section fence standards and
\ “Y” section for fabrication into fence standards)

Classes of Goods
Date of Exempting Notice
\ 23 December 1971 (Gazette, 13
\ January 1972)
\ 8 March 1972 (Gazette, 6 April
\ 1972)

Dated at Wellington this 16th day of February 1973.

MICHAEL CONNELLY, Minister of Customs.

*S.R. 1964/47

Import Control Exemption Notice (No. 6) 1973

PURSUANT to regulation 16 of the Import Control Regulations 1964*, the Minister of Customs hereby gives notice as follows:

1. (a) This notice may be cited as the Import Control Exemption Notice (No. 6) 1973.
   (b) This notice shall come into force on 1 July 1973.

2. Goods of the classes specified and for the purposes of the Customs Tariff falling within the Tariff items in the First Schedule hereto,
   imported from and being the produce or manufacture of any country, are hereby exempted from the requirements of a licence under the said
   regulations.

3. The exemptions from the requirement of a licence under the said regulations in respect of the goods of the classes set forth in the
   Second Schedule hereto, included in the exempting notice shown in the Second Schedule, are hereby withdrawn.

FIRST SCHEDULE
EXEMPTIONS CREATED

Classes of Goods

Tariff
Items
78.01.001 \ Solder of lead or tin
78.02.001 \ Unwrought lead (including argentiferous lead)
80.01.001
80.02.001
78.01.009

SECOND SCHEDULE
EXEMPTION WITHDRAWN

Tariff Items
Ex 78.01.001 \ Unwrought lead (including argentiferous lead), but excluding solder in cast bars
78.01.009 / .. 23 December 1971 (Gazette, 13
\ January 1972)

Dated at Wellington this 15th day of February 1973.

MICHAEL CONNELLY, Minister of Customs.

*S.R. 1964/47