748

THE NEW ZEALAND GAZETTE

No. 30

Import Control Exemption Notice (No. 7) 1972

Pursuant to regulation 16 of the Import Control Regulations 1964*, the Minister of Customs hereby gives notice as follows:

1. (a) This notice may be cited as the Import Control Exemption Notice (No. 7) 1972.
   (b) This notice shall come into force on 6 April 1972.

2. Goods of the classes specified and for the purposes of the Customs Tariff falling within the Tariff items in the First Schedule hereto, imported from and being the produce or manufacture of any country, are hereby exempted from the requirements of a licence under the said regulations.

3. The exemption from the requirement of a licence under the said regulations in respect of the goods of the classes set forth in the Second Schedule hereto, included in the exempting notice shown in the Second Schedule, is hereby withdrawn.

FIRST SCHEDULE

EXEMPTION CREATED

Classes of Goods

Tariff Item
Ex 73.11.001 to Angles, shapes and sections, including sheet piling, of iron or steel (excluding: unworked cold-formed, or cold-finished products; weather-seal of Tariff items 73.11.121 and 73.11.141; “Klip-lok” and similar roofing and decking; taper flange joists, viz: 3in. by 2in., 4in. by 1½in. and 2½in.; equal angles, viz: 1in. to 1½in. by ⅜in. and ¼in., 1in. to 2in. by ⅛in., 2in. by ⅜in., 2in. by ¼in., 2in. by ⅝in., 2in. by ⅜in., 2½in. by ¼in., 2½in. by ⅝in., 2½in. by ⅜in., 3in. by ¼in., 3in. by ⅝in., 3in. by ⅜in., 3in. by ½in., 3½in. by ¼in., 3½in. by ⅝in., 3½in. by ⅜in., 3½in. by ½in.; channels, viz: 2in. by 1in., 3in. by 1½in., 4in. by 2in., 5in. by 2½in., 6in. by 3in.; unequal angles, viz: 3in. by 2in. by ¼in.; 3in. by 2in. by ⅝in.; 3in. by 2in. by ⅜in.; 3½in. by ¼in., ⅝in., ⅜in., or ⅜in.; 3½in. by 3in. by ¼in., ⅝in. or ⅜in.; 4in. by 3in. by ¼in., ⅝in., ⅜in. or ½in.; “Y” section fence standards and “Y” section for fabrication into fence standards).
Ex 73.11.159

SECOND SCHEDULE

EXEMPTION WITHDRAWN

Date of Exempting Notice

Tariff Item
Ex 73.11.001 to Angles, shapes and sections, including sheet piling, of iron or steel (excluding: unworked cold-formed, or cold-finished products; weather-seal of Tariff items 73.11.121 and 73.11.141; “Klip-lok” and similar roofing and decking; taper flange joists, viz: 3in. by 2in., 4in. by 1½in. and 2½in.; equal angles, viz: 1in. to 1½in. by ⅜in. and ¼in., 1in. to 2in. by ⅛in., 2in. by ⅜in., 2in. by ¼in., 2in. by ⅝in., 2½in. by ¼in., 2½in. by ⅝in., 2½in. by ⅜in., 3in. by ¼in., 3in. by ⅝in., 3in. by ⅜in., 3½in. by ¼in., 3½in. by ⅝in., 3½in. by ⅜in., 3½in. by ½in.; channels, viz: 2in. by 1in., 3in. by 1½in., 4in. by 2in., 5in. by 2½in., 6in. by 3in.; unequal angles, viz: 3in. by 2in. by ¼in.; 3in. by 2in. by ⅝in.; 3in. by 2in. by ⅜in.; 3½in. by ¼in., ⅝in., ⅜in., or ⅜in.; 3½in. by 3in. by ¼in., ⅝in. or ⅜in.; 4in. by 3in. by ¼in., ⅝in., ⅜in. or ½in.; “Y” section fence standards and “Y” section for fabrication into fence standards). 23 December 1971 (Gazette,
Ex 73.11.159 No. 2, 13 January 1972).

Dated at Wellington this 8th day of March 1972.

GEORGE F. GAIR, Minister of Customs.

*S.R. 1964/47

Import Control Exemption Notice (No. 11) 1972

Pursuant to regulation 16 of the Import Control Regulations 1964*, the Minister of Customs hereby gives notice as follows:

1. (a) This notice may be cited as the Import Control Exemption Notice (No. 11) 1972.
   (b) This notice shall come into force on the day after the date of its notification in the New Zealand Gazette.

2. Goods of the classes specified and for the purposes of the Customs Tariff falling within the Tariff items in the First Schedule hereto, imported from and being the produce or manufacture of any country, are hereby exempted from the requirement of a licence under the said regulations.

3. The exemption from the requirement of a licence under the said regulations in respect of the goods of the class set forth in the Second Schedule hereto, included in the exempting notice shown in the Second Schedule, is hereby withdrawn.

FIRST SCHEDULE

EXEMPTIONS CREATED

Classes of Goods

Tariff Item
39.01.101 }
Floor coverings of plastic materials.
39.02.081 }
Ex 39.07.399 }

40.08.001 }
Flooring in the piece and floor coverings, of unhardened vulcanised rubber.
40.08.002 }
Ex 40.08.011 to }
Ex 40.08.019 }
40.14.003 }
Ex 40.14.069

Ex 45.04.001 }
Floor coverings, floor mats and tiles, of agglomerated cork.
45.04.012 }

48.12.001 }
Floor coverings prepared on a base of paper or of paperboard, whether or not cut to size, with or without a coating of linoleum compound.
48.12.009 }

59.10.011 }
Linoleum and materials prepared on a textile base in a similar manner to linoleum, whether or not cut to shape or of a kind used as floor coverings; floor coverings consisting of a coating applied on a textile base, cut to shape or not.
59.10.019 }

SECOND SCHEDULE

EXEMPTION WITHDRAWN

Date of Exempting Notice

Class of Goods
Linoleum, including “Congoleum” and similar floor coverings, but excluding vinyl and vinyl coated floor coverings. 23 December 1971 (Gazette, No. 2, 17 January 1972, Supplement).

Dated at Wellington this 27th day of March 1972.

GEORGE F. GAIR, Minister of Customs.

*S.R. 1964/47