Standards Endorsements and Licences




The Standards Act 1965—Overseas Specifications Endorsed as Suitable for Use in New Zealand

PURSUANT to section 17 of the Standards Act 1965, the Standards Council, on 23 July 1971, endorsed the undermentioned overseas specifications as suitable for use in New Zealand:

Number and Title of Specification Price of Copy $
BS 1468: 1967 Tin anodes and tin salts for electroplating. Metric units (including Amendment No. 1, AMD 122) ..... ..... ..... 0.80
BS 1872: 1964 Electroplated coatings of tin ..... 0.58
BS 2657: 1956 Fluoroboric acid and metallic fluoroborates for electroplating. Metric units ..... 0.55
BS 2816: 1957 Electroplated coatings of silver for engineering purposes ..... ..... ..... 0.95
BS 2903: 1970 Higher tensile steel hooks for chains, slings, blocks and general engineering purposes. Metric units ..... ..... ..... 2.10
BS 3156: Methods for the analysis of fuel gases— Part 2: 1968 Special determinations. Metric units (including Amendments No. 1 (AMD 120) and 2 (AMD 512)) ..... ..... ..... 3.50
BS 3252: 1960 Ingot tin ..... ..... ..... 0.46
BS 3332: 1961 White metal bearing alloy ingots ..... ..... ..... 0.58
BS 3338: Methods for the sampling and analysis of tin and tin alloys— Part 20: 1970 Nickel in capping metal (photometric method). Metric units ..... 0.70
BS 3370: 1970 Wrought magnesium alloys for general engineering purposes. Plate, sheet and strip. Metric units ..... ..... ..... 1.40
BS 3372: 1970 Wrought magnesium alloys for general engineering purposes. Forgings and cast forging stock. Metric units ..... ..... ..... 1.15
BS 3373: 1970 Wrought magnesium alloys for general engineering purposes. Bars, sections and tubes, including extruded forging stock. Metric units ..... ..... ..... 1.40
BS 3469: 1970 Instrument precision rolling bearings (ball bearings). Metric and imperial units ..... ..... ..... ..... 1.65
BS 3630: Methods for the sampling and analysis of zinc and zinc alloys— Part 11: 1970 Indium in ingot zinc and zinc alloys (polarographic method). Metric units ..... 0.70
Part 12: 1970 Arsenic in ingot zinc and zinc alloys (photometric method). Metric units ..... 0.70
BS 3745: 1970 Method for the evaluation of results of accelerated corrosion tests on metallic coatings. Metric units ..... ..... 1.15
BS 3907: Methods for the analysis of magnesium and magnesium alloys— Part 8: 1970 Total rare earths in magnesium alloys (gravimetric method). Metric units ..... 0.70
Part 11: 1970 Silicon in magnesium and magnesium alloys (photometric method). Metric units ..... ..... ..... 0.70
BS 4250: 1968 Commercial butane and propane. Metric units ..... ..... ..... ..... 0.95
BS 4300: Wrought aluminium and aluminium alloys for general engineering purposes— 4300/2: 1969 Aluminium alloys suitable for bright trim/reflector applications. Sheet and strip. Metric units ..... ..... 1.15
4300/3: 1969 Aluminium alloy suitable for bright trim/reflector applications. Forgings. Metric units ..... ..... ..... 1.15
4300/4: 1969 Aluminium alloys suitable for bright trim/reflector applications. Solid extruded bars and sections. Metric units ..... 0.95
4300/5: 1969 Free cutting aluminium alloy. Bar and wire. Metric units ..... ..... 0.95
4300/6: 1969 NS 31 Sheet and strip. Metric units ..... ..... ..... 1.15
4300/7: 1969 NS 41 Sheet and strip. Metric units ..... ..... ..... 1.15
4300/8: 1969 NS 51 Plate, sheet and strip. Metric units ..... ..... ..... 1.15
4300/9: 1969 NG 41 Wire. Metric units ..... ..... 0.95
4300/10: 1969 NT 51 Drawn tube. Metric units ..... ..... ..... 1.15
4300/11: 1969 NF 51 Forging stock and forgings. Metric units ..... ..... 1.40
4300/12: 1969 NE 51 Bar, extruded round tube and sections. Metric units ..... 1.40

Number and Title of Specification Price of Copy $
4300/13: 1969 NG 52 Welding wire. Metric units ..... ..... ..... ..... ..... 0.70
BS 4391: 1969 Recommendations for metric basic sizes for metal wire, sheet and strip. Metric units ..... ..... ..... ..... ..... 0.95

Copies of the specifications are obtainable through the Standards Association of New Zealand, New Zealand Display Centre Building, Sturdee Street (or Private Bag), Wellington.

Dated at Wellington this 26th day of July 1971.

G. H. EDWARDS, Director,
Standards Association of New Zealand.

(S.A. 6–114/2/9: 710–41)

The Standards Act 1965—Endorsement of Amendments to Overseas Specifications

PURSUANT to section 17 of the Standards Act 1965, the Standards Council, on 23 July 1971, endorsed as suitable for use in New Zealand the under-mentioned amendments to the relevant endorsed overseas specifications:

Amendment
Number, Title, and Price of Specification No./AMD
BS 577: 1966 Hexachloroethane. Metric units. 70c ..... ..... ..... ..... 1/PD 6354 25c
BS 1427: 1962 Routine control methods of testing water used in industry. Metric units. $2 ..... 3/PD 6344 46c
BS 2870: 1968 Rolled copper and copper alloys, sheet, strip and foil. Metric units. $3.27 ..... 1/428
BS 1016: Methods for the analysis and testing of coal and coke— Part 11: 1969 Forms of sulphur in coal. Metric units. 95c ..... ..... ..... 1/638
BS 4221: 1967 Spiral/braid wire reinforced rubber hose and hose assemblies fitted with end couplings. 70c ..... ..... ..... 1/622
BS 2316: Radio-frequency cables— Parts 1 and 2: 1968 Part 1: General requirements and tests; Part 2: British Government Services requirements. Metric and inch units. $1.75 ..... ..... 2/681

Unless otherwise stated, copies of the specifications so amended are obtainable from the Standards Association of New Zealand, New Zealand Display Centre Building, Sturdee Street (or Private Bag), Wellington.

Copies of the amendments will be supplied, free of charge, upon request.

Dated at Wellington this 26th day of July 1971.

G. H. EDWARDS, Director,
Standards Association of New Zealand.

(S.A. 7–114/2/10: E 201–206)

Wholesalers' Licences Under the Sales Tax Act—Notice No. 1971/7

PURSUANT to the Sales Tax Act 1932–33, licences to act as wholesalers have been granted as set out in Schedule I hereto, and licences to act as wholesalers have been surrendered or revoked as set out in Schedule II hereto. Sales Tax Notices No. 1970/2 and 1970/12 are hereby amended in the manner indicated in Schedule III hereto.

SCHEDULE I
LICENCES GRANTED

Name of Licensee Licence Operative Place at Which Business is From Carried On
A.H.I. St. Regis (N.Z.) Ltd. .. 1/4/71 Christchurch Dunedin
Angel Products Ltd. .. 1/10/70 Onehunga
Anthony Bearings (N.Z.) Ltd. .. 1/10/70 Otahuhu
Argosy Imports Ltd. .. 1/7/71 Christchurch



Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa PDF NZ Gazette 1971, No 56


NZLII PDF NZ Gazette 1971, No 56





✨ LLM interpretation of page content

🏭 Overseas Specifications Endorsed as Suitable for Use in New Zealand

🏭 Trade, Customs & Industry
26 July 1971
Standards Act, Overseas specifications, Endorsement, Metal, Alloys, Coatings, Fuels, Bearings, Wire
  • G. H. Edwards, Director, Standards Association of New Zealand

🏭 Amendments to Overseas Specifications Endorsed as Suitable for Use in New Zealand

🏭 Trade, Customs & Industry
26 July 1971
Standards Act, Overseas specifications, Amendments, Endorsement, Water, Coal, Coke, Hose, Cables
  • G. H. Edwards, Director, Standards Association of New Zealand

💰 Wholesalers' Licences Under the Sales Tax Act

💰 Finance & Revenue
Sales Tax Act, Wholesalers' licences, Licences granted, Licences surrendered, Licences revoked