New Zealand Gazette – 1971 – No. 13

Page 265

✨ Tariff Decisions



TARIFF DECISION LIST No. 171—continued
APPROVALS—continued

Tariff Item No. Goods Rates of Duty Part II Ref. List No. Effective From To*
B.P. MFN. Gen.
84.22.12 Cranes, self-propelled or specially suited for fitting to self-propelled chassis: Excluding: Free 20% 25% 10.2 171
(i) Cranes fitted to or specially for fitting to standard tractors;
(ii) Cranes designed to run on rails;
(iii) Hydraulic crane attachments designed for fitting to motor vehicles or tractors and having a maximum lifting capacity not exceeding 8,000 lb at 5 ft 6 in. radius (i.e., a capacity not exceeding 44,000 ft lb)
(iv) Mobile cranes up to S.W.L. lift capacity of 9,000 lb at 5 ft outreach
84.22.12 Winches, catalogued parts of, excluding parts of general use, when declared by an importer that they will be used in the repair of winches designed to be mounted on tractors Free 20% 25% 10.2 171
84.22.12 Winches, logging, exceeding 40,000 lb line pull, designed for mounting on tractors Free 20% 25% 10.2 171
84.22.14 Parts for trailers and semi-trailers, viz: Landing legs (excluding caravan parking legs) Free .. 15% 10.8 171
84.22.15 Idlers, troughing and return, having rollers of 6 in. or greater diameter Free 20% 25% 10.2 171
84.23.14 Pile driving hammers, having steam, diesel, or pneumatic actuated pistons Free 20% 25% 10.2 171
85.01.13 Transformers, instrument, (“Variac”, “Clam”, “Voltac”) for metering, testing, and protecting electronic circuits Free 20% 25% .. 171
87.06.09 Boosters, steering, hydraulic or air .. .. .. Free 20% 25% 10.2 171
97.06.04 Face pieces or inserts for golf club heads .. .. Free .. 20% 10.8 171
97.06.04 Forgings and castings, steel, in the rough, specially suited for making golf club heads. (Steel heads are to be regarded as in the rough if, after forging and casting, they are merely roughly ground to remove the fin produced between the half moulds in drop forgings or castings, or to remove the indentations of the hammer produced in hand forgings. The heads must not be further worked, except that a pilot hole may be drilled in the shank, such hole to be reamed and the shank to be tapered in New Zealand. Heads in the rough, but without pilot holes, being instead lightly ground or lightly turned on the shank, are to be admitted under the above decision) Free .. 20% 10.8 171
97.06.04 Golf club heads, wooden, rough turned but not further manufactured Free .. 20% 10.8 171
97.06.04 Shafts of approved descriptions when declared that they will be used only in making or repairing golf clubs and that in making such clubs the heads therefor will be fully manufactured in New Zealand or will be made from wooden shapes, rough-turned but not further manufactured, or steel in the form of rough forgings or rough castings unworked. NOTE—The importer of the shafts need not be the manufacturer of the heads. In manufacturing golf clubs, he must, however, use heads which have been manufactured in New Zealand, in accordance with the conditions set out in the decision: Approved: (a) Shafts of steel, whether in the black, polished, plated, coated with casein, or otherwise surfaced, but without any attachments of any kind; (b) Shafts of aluminium, whether polished, plated, coated with casein, or otherwise surfaced, but without attachments of any kind Free .. 20% 10.8 171


Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa — PDF NZ Gazette 1971, No 13


NZLII — PDF NZ Gazette 1971, No 13




✨ LLM interpretation of page content

🏭 Tariff Decision List No. 171: Approvals of goods with specific rates of duty (continued from previous page)

🏭 Trade, Customs & Industry
Tariff decisions, Customs, Goods, Rates of Duty, Approvals, Cranes, Winches, Trailers, Transformers, Golf Clubs