Tariff Item
Description

44.05.31
44.05.34
Ex 44.05.35
44.05.36
44.05.39

Wood sawn lengthwise, sliced or peeled, but not further prepared, of a thickness exceeding 5 mm, of non-coniferous species (excluding balsa wood).

Ex 44.22.02 Casks and barrels, unassembled, suited for packing meat products, whether or not including hoops, viz: hard fir casks only.
Ex 44.25.04 Wooden tool handles, viz: Shovel and similar handles, double bent or Ames pattern; spade handles, double bent type; other tool handles of wood (excluding file, knife, and lawnmower, broom, mop, hoe, rake, and similar handles).

46.02.01 Plaiting materials bound together in parallel strands or woven, in sheet form, including matting, mats and screens; straw
46.02.09 envelopes for bottles.

Ex 48.03.05 Glassine paper (excluding tracing paper).
Ex 48.03.09

Ex 43.21.09 Articles of paper pulp, paper, paperboard or cellulose wadding, viz: recording dials and sheets and rolls for self-recording apparatus.

Ex 51.02.19 Nylon monofilament sewing thread.
Ex 58.07.02 Chenille yarn, gimped yarn, viz: Piping on declaration for use in the manufacture of rubber goods.
Ex 59.01.09 Cotton flock on declaration for use in the manufacture of rubber goods.
Ex 59.07.18 Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books.
Ex 59.07.19

62.03.02 Sacks and bags, of a kind used for the packing of goods.
62.03.09

67.03.00 Human hair, dressed, thinned, bleached or otherwise worked; wool or other animal hair prepared for use in making wigs and the like.

68.13.05 Fabricated asbestos and articles thereof, reinforced or not, other than goods falling within Tariff heading No. 68.14; mixtures
68.13.09 with a basis of asbestos and mixtures with a basis of asbestos and magnesium carbonate, and articles of such mixtures (excluding millboard and asbestos fabrics, clothing and footwear).

70.04.01 Cast, rolled, drawn or blown glass, in rectangles, not further worked than surface ground or polished (other than unworked
70.04.09 drawn or blown clear glass sheets of 16/32 oz., 3/16 in., 7/32 in., 1/4 in.).
Ex 70.05.00
70.06.01
70.06.09

73.09.01 Universal plates of iron or steel.
73.09.09

Ex 73.10.10 Bars and rods of iron or steel, hot-rolled, forged, extruded, cold-formed or cold-finished (excluding: wire rod of 2, 3, and 5 Ex 73.10.20 to 7 gauge in diameter; rounds (including deformed bars but excluding wire rods) 1/4 in. to 1½ in. diameter inclusive; flats, viz: 1 in. to 1¾ in. wide by 1/8 in. to ¼ in. thick, and 2 in., 2½ in., 3 in., 3½ in., and 4 in. wide by 1/4 in. to ½ in. thick); hollow mining drill steel.

Ex 73.11.11 Angles, shapes and sections, of iron or steel, hot-rolled, forged, extruded, cold-formed or cold-finished (excluding: metal backed weatherseal; taper flange joists, viz: 3 in. by 2 in., 4 in. by 1¾ in., 4 in. by 2½ in.; equal angles, viz: 1 in. to 1½ in. by 3/16 in. and 1/4 in.; 1 in. to 2 in. by 1/8 in.; 2 in. by 3/16 in., 1/4 in., and 5/16 in.; 2½ in. by 1/4 in., 5/16 in., and 3/8 in.; 3 in. by 1/4 in., 5/16 in., and 3/8 in.; channels, viz: 2 in. by 1 in.; 3 in. by 1½ in.; 4 in. by 2 in.; 5 in. by 2½ in.; unequal angles, viz: 3 in. by 2 in. by 1/4 in., 5/16 in., 3/8 in.; “Klip-lok” and similar roofing and decking; “Y” section fence standards and “Y” section for fabrication into fence standards); sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements.
Ex 73.11.49

Ex 73.12.01 Hoop and strip, of iron or steel, hot-rolled or cold-rolled (excluding: galvanised hoop and strips; “Klip-lok” and similar roofing and decking).
Ex 73.12.09

73.13.29
73.13.32

Sheets and plates, of iron or steel, hot-rolled or cold-rolled (excluding: corrugated sheet iron; galvanised iron or steel sheet).
73.13.39
73.13.42
Ex 73.13.49
Ex 73.13.54
to

Ex 73.13.61 Iron or steel wire, coated, but not insulated, viz: Bead wire on declaration for use in tyre manufacture.
Ex 73.13.62 Alloy steel and high carbon steel of Tariff heading No. 73.15 in the forms specified in Tariff heading No. 73.09 to 73.13 (excluding: stainless steel bars and rods, angles, shapes, and sections, universals, plates, sheets, hoop and strip; corrugated sheet iron; high carbon and alloy wire rod of 5 gauge to 7 gauge).
Ex 73.13.64
Ex 73.13.69 Wire of alloy and high carbon steel, viz: Bronze coated alloy steel wire on declaration for use in tyre manufacture.
Ex 73.14.06 Metatarsal pads.
Ex Tariff Other articles of iron or steel, viz: Bead nipples on declaration for use in tyre manufacture.
heading No. 73.15 Other articles of aluminium, viz: Metal neck bands on declaration for use in the manufacture of hot water bottles.
Ex 73.15.98
Ex 73.40.99
Ex 76.16.99 Wrought bars, rods, angles, shapes and sections, of zinc; zinc wire.

79.02.01 Wrought plates, sheets and strip, of zinc; zinc foil.
to
79.02.09
79.03.11
79.03.14
79.04.00 Tubes and pipes and blanks therefor, of zinc; hollow bars, and tube and pipe fittings of zinc.

Ex 73.21.09 Scaffolding fittings of metal.
Ex 76.08.09

Ex 79.05.00 Stainless steel woven wire cloth of 0–17½ s.w.g.
Ex 73.27.05 Letter clips, paper clips, staples, indexing tags, and similar stationery goods, of base metal (excluding: fittings for loose-leaf binders, for files or for stationery books, of base metal; paper clips constructed solely of wire up to a maximum thickness of 20 s.w.g.).
Ex 73.27.09
83.05.01 Liquid fuel pressure lanterns and parts thereof.
Ex 83.05.09

Ex 83.07.09 Marine internal combustion piston engines.
84.06.21
84.06.24