Pursuant to the provisions of the Standards Act 1965, the
Standards Council, on 25 June 1969, revoked the under-
mentioned standard recommendation:

Number and Title of Standard Recommendation
NZSR 2:1964 Glazing and fixing of glass for buildings; being
BSI/CP 152:1960. (Superseded by NZS 2258.)
Dated at Wellington this 7th day of July 1969.
G. H. EDWARDS, Director,
Standards Association of New Zealand.
(S.A. 114/2/4:42)

The Standards Act 1965-British Standards, Revisions, and
Amendments Available for Comment

Pursuant to subsection (3) of section 23 of the Standards Act
1965, notice is hereby given that the British standards, revisions,
and amendments listed in the Schedule hereto are being con-
sidered for adoption as New Zealand standard specifications or
for endorsement as being suitable for use in New Zealand.
All persons who may be affected by them and who desire to
comment thereon may, on application, obtain copies on loan
from the Standards Association of New Zealand, Private Bag,
Wellington.

Requests should specify that copies are required for comment
purposes.
The closing date for the receipt of comment is 15 August
1969.
Dated at Wellington this 9th day of July 1969.
G. H. EDWARDS, Director,
Standards Association of New Zealand.
(S.A. 114/2/1)
SCHEDULE
LIST OF BRITISH STANDARDS
New Issues
Title
903: Methods of testing vulcanised rubber-
903:Part A27:1969 The determination of rubber to fabric
adhesion (direct tension).
1673: Methods of testing raw rubber and unvulcanised
ymers (SBR). Determination of organic acid, soap and
compounded rubber-
1673:Part 5/5.5:1969 Analysis of styrene-butadiene copol-
solvent extract.
1673:Part 6:1969 Determination of limiting viscosity number
of raw rubbers.
2770: Recommendations for the pictorial marking of goods
in transit-
2770:Part 2:1969 Packages containing photographic materials
sensitive to radiant energy.
3417: Agricultural power take-off shafts and guards-
3417:Part 5:1969 Testing of p.t.o. shaft guards.
3680: Methods of measurement of liquid flow in open
channels-
3680:Part 4: Weirs and flumes.
3680:Part 4B:1969 Long-base weirs.
3939: Graphical symbols for electrical power telecommuni-
cations and electronics diagrams-
3939:Section 21:1969 Pure logic and functional symbols.
3939:Section 22:1969 Block symbols for telecommunications
transmission and general applications.
4229: Metric sizes of non-ferrous and ferrous bar-
4229:Part 2:1969 Ferrous bars.
4300: Wrought aluminium and aluminium alloys-
4300/2:1969 Aluminium alloys suitable for bright trim/
reflector applications. Sheet and strip.
4300/3:1969 Aluminium alloy suitable for bright trim/reflec-
tor applications. Forgings.
4300/4:1969 Aluminium alloys suitable for bright trim/reflec-
tor applications. Solid extruded bars and sections.
4300/5:1969 Free cutting aluminium alloy. Bar and wire.
4413: Non-returnable fibreboard containers for flowers-
4413:Part 1:1969 Containers 600 mm x 400 mm.
4321:1969 Methods of test for printing inks.
4415:1969 Method for the determination of tensile strength of
paper and board.
4418:1969 A.c. electric pedestal type fans and regulators.
4419:1969 Recommendations for the measurement of folding
endurance of paper.
4421:1969 A digital input/output interface for data collection
systems.
New Issues
B.S.
4422: Glossary of terms associated with fire-
4422:Part 1:1969 The phenomenon of fire.
4429:1969 Rigging screws and turnbuckles.
4430: Safety of powered industrial trucks-
4430:Part 1:1969 Manufacture.
4430:Part 2:1969 Operation and maintenance.
4432: Methods for determining optical properties of pulp,
paper and board-
4432:Part 1:1969 Determination of diffuse ISO reflectance
factor of pulp, paper and board.
4432:Part 2:1969 Measurement of diffuse ISO brightness
(blue reflectance factor) of paper and board.
(4432:Part 3 appears under "Revised Standards" as it is a
revision of BS 2923.)
4436:1969 Methods for the stability testing of reach trucks and
straddle trucks.
4437:1969 Method for the end quench hardenability test for
steel (Jominy test).
4441: Percussive rock-drilling bits, rods and stems
4441:Part 1:1969 Taper fitting detachable bits and rods.
4441:Part 2:1969 Integral stems.
4442: Lathe spindle noses and faceplates-
4442:Part 1:1969 Types "A" and "Camlock".
4445:1969 Schedule of tests for gasification and reforming
plants using hydrocarbon feedstocks.
4446:1969 Presentation of conference proceedings.
4447:1969 Methods for establishing the performance of pre-
stressing anchorages for post-tensioned construction.
4450:1969 Method for determination of ash from petroleum
products.
4451:1969 Method for determination of Ramsbottom carbon
residue of petroleum products.
4452:1969 Method for determination of pour point of
petroleum oils.
4453:1969 Method for determination of distillation of cutback
bitumen and road oil.
4454:1969 Method for determination of sulphur in petroleum
products (bomb method)-
4455:1969 Method for determination of corrosive substances
in grease copper strip test.
4456:1969 Method for determination of oxidation stability of
aviation fuels (potential residue method).
4457:1969 Method for determination of neutralisation number
of petroleum products and lubricants (potentiometric
titration method).
4458:1969 Method for determination of cloud point of pet-
roleum oils.
4459:1969 Method for calculating viscosity index of petroleum
products and lubricants from kinematic viscosity.
4461:1969 Cold worked steel bars for the reinforcement of
concrete.
Revised Standards
292:1969 Dimensions of ball bearings and cylindrical roller
bearings.
367:1969 A.c. electric ceiling type fans and regulators.
380:1969 A.c. electric table type fans and regulators.
696: Gerber method for the determination of fat in milk
and milk products-
696:Part 2:1969 Methods.
787: Mining type flameproof gate-end boxes-
787:Part 1:1969 Gate-end boxes for direct-on-line motor
starting (for use on 3-phase a.c. circuits up to 650 volts).
903: Methods of testing vulcanised rubber-
903:Part A6:1969 Determination of compression set.
949:1969 Screwing taps.
1041: Code for temperature measurement-
1041:Part 3:1969 Industrial resistance thermometry.
1192:1969 Building drawing practice.
1454:1969 Consumers' electricity control units.
Fuse and miniature circuit breaker types principally for use
in domestic premises.
1503:1969 Steel for fired and unfired pressure vessels forgings.
1642:1969 Metric and inch dimensions of plummer blocks for
radial ball and roller bearings.
1673: Methods of testing raw rubber and unvulcanised
compounded rubber-
1673:Part 3:1969 Methods of physical testing.
1983: Chucks for machine tools and portable power
tools-
1983:Part 1:1969 Tool-holding chucks.
2477:1969 Coal cutting tools and tool holders.
2487:1969 Denture base polymer.
2770: Recommendations for the pictorial marking of goods
in transit-
2770:Part 1:1969 Handling instructions for non-dangerous
goods.