New Zealand Gazette – 1968 – No. 75

Page 2127

✨ Tariff Notice - Application for Variation of Approval



21 NOVEMBER

THE NEW ZEALAND GAZETTE

2127

Tariff Notice No. 1968/109—Application for Variation of Approval

Notice is hereby given that application has been made for variation of a current approval of the Minister of Customs as follows:

Appn Tariff Goods Rates of Duty Part II List No. Effective
No. Item B.P. MFN. Gen. Ref.
84.61 Current Approval: Cocks and valves Free 20% 25% 10.2
Excluding:
(1) Penstocks, floodgates.
(2) Valves, gate, of the following types-
(a) Stainless steel 3 in. to 18 in., or cast iron
3 in. to 14 in., specially suited for use
with pulp or paper stock.
(b) Brass, ½ in. and ¾ in.
(c) ⅜ in. to 4 in., of any kind of bronze.
(3) Valves, globe, of any kind of bronze, suited for
use with steam at working pressures of 50 lb
p.s.i. or over, of the following types-
(a) Stainless steel seats, screwed ⅜ in. to 2 in.
(b) Yoke top with bronze or stainless steel seats,
flanged, ¾ in. to 6 in.
(c) Angle, yoke top with bronze or stainless
steel seats, flanged, 1 in. to 3 in.
(d) Valves, safety, spring-loaded, screwed or
flanged, ⅜ in. to 4 in.
(e) Fibre or teflon seats, screwed, sizes ½ in. to
2 in.
(4) Valves, foot, of copper alloy, not exceeding
2 in.
(5) Valves, float (sometimes known as “ball”), of
brass or other copper alloy, not exceeding
6 in.
(6) Sluice or wedge gate valves, cast iron, 4”, 6”,
and 8” double flange or spigot ends, hand-
operated waterworks pattern, for test pres-
sures not exceeding 600 ft head of water, not
including similar valves with zinc free bronze
trim (U.K. Specification B.S. 1218 class 1).
(7) Check valves (reflux), cast iron, 3”, 4”, and 6”.
Standard type for test pressures not exceeding
600 ft head of water, not including special
nonconcussive types or valves with external
operating levers.
(8) Plugcocks, bronze, screwed and flanged
straight through or 3-way, sizes ½ in. to 4 in.
(but not sleeve packed plugcocks).
(NOTE-This approval does not cover taps,
bibcocks, or fire hydrants.)
4121 Requested Approval: Cocks and valves Free 20% 25% 10.2
Excluding:
(1) Penstocks, floodgates.
(2) Valves, gate, of the following types-
(a) Stainless steel 3 in., to 18 in., or cast iron 3 in.
to 14 in., specially suited for use with pulp
or paper stock.
(b) Brass, ½ in. and ¾ in.
(c) ⅜ in. to 4 in., of any kind of bronze.
(3) Valves, globe, of any kind of bronze, suited for
use with steam at working pressures of 50 lb
p.s.i. or over, of the following types-
(a) Stainless steel seats, screwed ⅜ in. to 2 in.
(b) Yoke top with bronze or stainless steel seats,
flanged, ¾ in. to 6 in.
(c) Angle, yoke top with bronze or stainless
steel seats, flanged, 1 in. to 3 in.
(d) Valves, safety, spring-loaded, screwed or
flanged, ⅜ in. to 4 in.
(e) Fibre or teflon seats, screwed, sizes ½ in. to
2 in.
(f) Flanged bonnet top ¾ in. to 3 in.
(g) Flanged regulating check angle or straight
type, ¾ in. to 6 in.
(4) Valves, foot, of copper alloy, not exceeding
2 in.
(5) Valves, float (sometimes known as “ball”), of
brass or other copper alloy, not exceeding
6 in.
(6) Sluice or wedge gate valves, cast iron, 4 in.,
6 in., and 8 in. double flange or spigot ends,
hand-operated waterworks pattern for test
pressures not exceeding 600 ft head of water,
not including similar valves with zinc free
bronze trim (U.K. Specification B.S. 1218,
class 1.)
(7) Check valves (reflux), cast iron, 3 in., 4 in., and
6 in. Standard type for test pressures not
exceeding 600 ft head of water, not including
special nonconcussive types or valves with
external operating levers.
(8) Plugcocks, bronze, screwed and flanged straight
through or 3-way, sizes ½ in. to 4 in. (but not
sleeve packed plugcocks).
(NOTE-This approval does not cover taps,
bibcocks, or fire hydrants.)


Next Page →

PDF embedding disabled (Crown copyright)

View this page online at:


VUW Te Waharoa — PDF NZ Gazette 1968, No 75


NZLII — PDF NZ Gazette 1968, No 75




✨ LLM interpretation of page content

🏭 Application for Variation of Approval - Cocks and Valves

🏭 Trade, Customs & Industry
21 November 1968
Tariff Notice, Customs, Application, Approval, Cocks and Valves, Minister of Customs, Objection
  • Minister of Customs