✨ Tariff Decision List
4 JULY
THE NEW ZEALAND GAZETTE
TARIFF DECISION LIST No. 29—continued
| Tariff Item No. | Goods | B.P. | MFN. | Gen. | Part II Ref. | List No. | Effective From | To* |
|---|---|---|---|---|---|---|---|---|
| 61.06.00 | Scarf material in the piece, longitudinally hemmed and requiring further fabrication (for example, hemming) | Free | .. | 15% | 10.8 | 29 | 1/7/68 | 31/12/68 |
| 62.02.05 | Towelling in the piece, longitudinally hemmed and requiring further fabrication (for example, hemming) | Free | .. | 15% | 10.8 | 29 | 1/7/68 | 31/12/68 |
| 62.02.06 | Tea towelling in the piece, longitudinally hemmed and requiring further fabrication (for example, hemming) | Free | .. | 15% | 10.8 | 29 | 1/7/68 | 31/12/68 |
| 62.05.09 | Terry fabric in the piece, longitudinally hemmed and requiring further fabrication (for example, hemming) | Free | .. | 15% | 10.8 | 29 | 1/7/68 | 31/12/68 |
| 73.20.11 | Welding fittings, including flanges to British or American standards, designed for tubes of 4 in. but less than 9 in. nominal internal diameter | Free | 20% | 25% | 10.2 | 29 | 1/7/68 | 31/12/71 |
| 73.40.99 | Fittings cable, suited for use in operating boat rudder controls | Free | 20% | 25% | 10.2 | 29 | 1/7/68 | 31/12/73 |
| 73.40.99 | Hose couplings, quick release types, suited for use with compressed air | Free | 20% | 25% | 10.2 | 29 | 1/4/68 | 31/12/70 |
| 84.10.09 | Pumps, as may be approved, when declared by: ... (a) a manufacturer that they will be used by him only in making or repairing motor-driven spray units (b) an importer that they will be sold by him only for use in making or repairing motor-driven spray units Approved— Comet diaphragm, types P65, IDS60 | Free | Free | Free | 10.3 | 29 | 1/7/67 | ... |
| 84.21.09 | Sprinklers, irrigation, revolving head types, other than lawn and garden sprinklers of household types | Free | Free | Free | 10.3 | 29 | 1/7/67 | 31/12/68 |
| 84.22.09 | Lifts, electric, the following components, when imported as part of complete lift assemblies: Control mechanisms (electric controllers) Overspeed governors Electric driving motors, when clearly intended to be mounted on the same bedplate as the winding gear or separately, but not forming part of the structure of the winding gear | Free | 20% | 25% | 10.2 | 29 | 1/7/68 | 30/6/72 |
| 84.61 | Cocks and valves ... Excluding: (1) Penstocks, floodgates (2) Valves, gate, of the following types— (a) Stainless steel 3 in. to 18 in., or cast iron 3 in. to 14 in., specially suited for use with pulp or paper stock (b) Brass, ½ in., and ¾ in. (c) ⅜ in. to 4 in. of any kind of bronze (3) Valves, globe, of any kind of bronze, suited for use with steam at working pressures of 50 lb p.s.i. or over, of the following types— (a) Stainless steel seats, screwed ⅜ in. to 2 in. (b) Yoke top with bronze or stainless steel seats, flanged, ¾ in. to 6 in. (c) Angle, yoke top with bronze or stainless steel seats, flanged, 1 in. to 3 in. (d) Valves, safety, spring-loaded, screwed or flanged, ⅜ in. to 4 in. (4) Valves, foot, of copper alloy, not exceeding 2 in. (5) Valves, float (sometimes known as “ball”), of brass or other copper alloy, not exceeding 6 in. (6) Sluice or wedge gate valves, cast iron, 4”, 6”, and 8” double flange or spigot ends, hand-operated waterworks pattern, for test pressures not exceeding 600 ft head of water, not including similar valves with zinc free bronze trim (U.K. Specification B.S. 1218 class 1) (7) Check valves (reflux), cast iron, 3”, 4”, and 6” Standard type for test pressures not exceeding 600 ft head of water, not including special non-concussive types or valves with external operating levers (NOTE—This approval does not cover taps, bibcocks, or fire hydrants) | Free | 20% | 25% | 10.2 | 29 | 1/7/68 | 31/12/69 |
| 84.61 | Nozzles, specially suited for use in refuelling aircraft ... Assemblies, drive shaft, incorporating universal joints, for use in transmitting power from tractors to agricultural machines or appliances | Free | 20% | 25% | 10.2 | 29 | 4/7/68 | 31/12/72 |
| 84.63.09 | Boxes, control, single and double lever, suited for marine engines | Free | 20% | 25% | 10.2 | 29 | 1/7/67 | 31/12/72 |
| 84.65.09 | Steering wheels used in the guidance systems of ships and boats | Free | 20% | 25% | 10.2 | 29 | 1/7/68 | 30/6/71 |
Next Page →
PDF embedding disabled (Crown copyright)
View this page online at:
VUW Te Waharoa —
NZ Gazette 1968, No 42
NZLII —
NZ Gazette 1968, No 42
✨ LLM interpretation of page content
🏭
Tariff Decision List No. 29 - Goods and Rates of Duty
(continued from previous page)
🏭 Trade, Customs & IndustryTariff Decisions, Customs, Import Duties, Goods Classification, Rates of Duty, Specific Goods