27 OCTOBER
THE NEW ZEALAND GAZETTE
1683

Amendments
B.S.

Ref.
No.
PD

Title

1140 : 1957 General requirements for spot welding of
light assemblies in mild steel. Amendment
No. 1

5860

1250 : — Domestic appliances burning town gas—
Part 3 : 1963 Water-heating appliances.
Amendment No. 1

5852

1295 : — Tests for use in the training of welders—
Manual metal-arc and oxy-acetylene weld-
ing of mild steel. Amendment No. 2

5849

1344 : 1947 Methods of testing vitreous enamel finishes.
Amendment No. 1

5870

This amendment removes from this edition
Section 1 ‘Determination of acid resistance’
and Section 3 ‘Resistance to thermal shock’.
These sections are now replaced by B.S. 1344
Part 2 : 1965 and B.S. 1344 Part 1 : 1965
respectively.

1362 : 1953 Cartridge fuse-links for use in plugs. Amend-
ment No. 2

5864

*1719: — Classification, coding and marking of covered
electrodes for metal-arc welding—
Part 1 : 1963 Classification and coding.
Amendment No. 1

5873

1756 : — Methods for the sampling and analysis of flue
gases—
Part 4 : 1965 Miscellaneous analyses.
Amendment No. 1

5858

1811 : 1961 Methods of test for wood chipboards and
other particle boards. Amendment No. 2..

5866

2051 : Part 2 Olive, soldered nipple and flared types of
1954 copper and copper alloy tube fittings.
Amendment No. 9

5856

2028 : 1954 Code for disappearing filament optical pyro-
meters. Amendment No. 1

5861

2604 : 1963 Resin-bonded wood chipboard. Amendment
No. 3

5867

*2630:1955 Projection welding of low carbon steel sheet
and strip. Amendment No. 2

5868

2642 : 1965 General requirements for the arc welding of
steel to B.S. 968 and similar steels. Amend-
ment No. 1

5865

2692 : 1956 Fuses for alternating current circuits above
660 volts. Amendment No. 4

5872

*2937:1957 General requirements for seam welding in
mild steel. Amendment No. 1

5851

*2996:1958 Projection welding of low carbon wrought
steel studs, bosses, bolts, nuts and annular
rings. Amendment No. 1

5859

*3019: — General recommendations for manual inert-
gas tungsten-arc welding—
Part 1 : 1958 Wrought aluminium, alu-
minium alloys and magnesium alloys.
Amendment No. 2

5875

3360 : 1961 Copper conductors in insulated cables and
cords. Amendment No. 2

5877

3451 : 1962 Methods of testing fusion welds in aluminium
and aluminium alloys. Amendment No. 1

5842

3571 : — General recommendations for manual inert-
gas metal-arc welding—
Part 1 : 1962 Aluminium and aluminium
alloys. Amendment No. 1

5871

3691 : 1963 Glass fibre rovings for the reinforcement of
ployester resin systems. Amendment No. 1

5874

3730 : 1964 Methods for the assessment of departures
from roundness. Amendment No. 1

5857

3961 : 1965 Cast iron screw-down stop valves and stop
and check valves for general purposes.
Amendment No. 1

5869

*These amendments are of an editorial nature, consequent on the
publication of the revised edition of B.S. 499 ‘Welding terms and
Symbols’.

The Standards Act 1965—Amendment of Standard
Specifications

PURSUANT to the provisions of the Standards Act 1965, the
Standards Council, on 14 October 1966, amended the under-
mentioned standard specifications by the incorporation of the
amendments shown hereunder:

Number and Title of Standard
Specification

Amendment

NZSS 496:1952 Profiles of mouldings
and joinery

No. 2

NZSS 508:— Methods for the
measurement of fluid flow in
pipes—
Part 1:1966 Orifice plates, nozzles,
and venturi tubes; being BS 1042:
Part 1:1964

No. 1 (PD 5636)

NZSS 593:1966 Methods of testing
fusion-welded joints and weld metal
in steel; being BS 709:1964

No. 1 (PD 5721)

NZSS 904:1966 Ethyl acetate; being
BS 553:1965

No. A

NZSS 1154:1966 Synthetic resin ad-
hesives (phenolic and aminoplastic)
for plywood; being BS 1203:1963

No. A

NZSS 1155:1966 Synthetic resin ad-
hesives for gap filling (phenolic and
aminoplastic), for construction work
in wood; being BS 1204:1964

No. A

NZSS 1224:1966 Copper alloy screw-
down stop valves for general pur-
poses; being BS 2060:1964

No. 1 (PD 5719)

No. A

NZSS 1339:1958 Pitch-impregnated
fibre drain and sewer pipes; being
BS 2760:1956

No. 1 (PD 4328)

No. 2 (PD 5047)

NZSS 1366:— Tests for use in the
approval of welders—
Part 1:1958 Manual metal-arc and
oxy-acetylene welding of mild steel
and low-alloy steel sheets, plates,
and sections; being BS 2645:Part
1:1955

No. 1 (PD 5550)

NZSS 1430:1966 Copper alloy check
valves for general purposes; being
BS 1953:1964

No. 1 (PD 5718)

No. A

NZSS 1546:1960 Higher tensile steel
hooks for chains, slings, blocks and
general engineering purposes; being
BS 2903:1957

No. 1 (PD 3254)

No. 2 (PD 4805)

No. 3 (PD 5049)

No. 4 (PD 5479)

NZSS 1704:1962 Protective clothing
for welders; being BS 2653:1955

No. 2 (PD 5368)

NZSS 1757:1962 Body measurements
and size designations for the sizing
of teenage girls’ ready-to-wear apparel

No. 1

NZSS 1818:1963 Small fusion-welded
air reservoirs for road and railway
vehicles; being BS 3256:1960

No. 3 (PD 5020)

NZSS 2136:1966 X-ray protective
gloves for medical diagnostic pur-
poses up to 100 kV. peak; being BS
2606:1955

No. 1 (PD 3898)

No. 2 (PD 4572)

No. 3 (PD 5236)

NZSS 2131:1966 Tests for use in the
training of welders. Manual metal-
arc and oxy-acetylene welding of mild
steel; being BS 1295:1959

No. 1 (PD 5515)

Application for copies of the standard specifications so
amended should be made to the Standards Association of
New Zealand, Private Bag, Wellington C. 1.

Copies of the amendments will be supplied, free of charge,
upon request.

Dated at Wellington this 18th day of October 1966.

G. H. EDWARDS, Director,
Standards Association of New Zealand.

(S.A. 114/2/3:33–35:88–108)

SUMMARY OF TRADING BANKS’ MONTHLY RETURNS OF PRINCIPAL LIABILITIES AND ASSETS IN RESPECT OF NEW
ZEALAND BUSINESS AS AT CLOSE OF BUSINESS ON 28 SEPTEMBER 1966

In accordance with subsection (4) of section 31 of the Reserve Bank of New Zealand Act 1964
(All amounts in New Zealand Currency)

LIABILITIES†
(£N.Z. thousands)

Australia and
New Zealand
Bank
Limited

Bank of New
South Wales

Bank of
New Zealand

The
Commercial
Bank of
Australia
Limited

The
National
Bank of
New Zealand
Limited

Totals

£
£
£
£
£
£

1. Demand deposits in New Zealand..

62,512

39,501

114,048

23,195

52,731

291,987

2. Time deposits in New Zealand

15,985

11,513

21,450

4,344

9,944

*63,236

3. Liabilities elsewhere than in New Zealand incurred in
   respect of New Zealand business

1,352

392

1,171

236

1,568

4,719

4. Bills payable and all other liabilities in New Zealand,
   including balances due to other banks but excluding
   shareholders’ funds

3,783

526

2,627

53

7,068

14,057

B