12 SEPTEMBER

Revisions
B.S.
4008: 1966 Cattle grids on private roads. 4s. 6d.
4009: 1966 An artificial mastoid for the calibration of bone
vibrators, used in hearing aids and audiometers.
4s. 6d.

4011 : 1966 Recommendations for the co-ordination of dimensions in building. Basic sizes for building components and assemblies. 4s.
Addendum No. 1 to B.S. 1501 : 1964 (PD 5796). 2s.
Addendum No. 1 : 1966 to B.S. 3558 : 1962 (PD 5738) Glossary of terms used in the rubber industry. 6s.
355 : — Mining-type transformers—
355 : Part 1 : 1966 Dry-type transformers. 10s.
599 : 1966 Methods of testing pumps. 30s.
778 : 1966 Steel pipes and joints for hydraulic purposes (A4 size). 12s. 6d.
861 : — Air-break switches and isolators—
861 : Part 2 : 1966 Switches and isolators for voltages not exceeding 660 volts and currents up to 800 amperes a.c. 10s.
988, 1097, 1076, 1451 : 1966 Mastic asphalt for building (limestone aggregate). 6s.
1041 : — Code for temperature measurement—
1041 : Part 4 : 1966 Thermocouples. 10s.
1121 : — Methods for the analysis of iron and steel—
1121 : Part 12 : 1966 Silicon in acid resisting high silicon iron : Gravimetric. 3s.
1121 : Part 22 : 1966 Tin in ferro-tungsten and tungsten metal Volumetric. 3s.
1133 : — Packaging code—
1133 : Section 6 : 1966 Temporary protection of metal surfaces against corrosion (during transport and storage). 30s.
1162, 1418, 1410 : 1966 Mastic asphalt for building (natural rock asphalt aggregate). 6s.
1165 : 1966 Clinker aggregate for concrete. 3s. 6d.
1608 : 1966 Electrically-driven refrigerant condensing units. 5s.
1699 : — Magnetic compasses and binnacles—
1699 : Part 1 : 1966 Class A, for use in merchant ships. 5s.
1735 : 1966 Flanged cast iron outside-screw-and-yoke wedge gate valves, Class 125, sizes 1½ in. to 24 in., for the petroleum industry. 10s.
2052 : 1965 Ropes made from coir, hemp, manila, and sisal. 20s.
2488 : 1966 Schedule of preferred numbers for the resistance of resistors and the capacitance of capacitors for telecommunication equipment (A4 size). 7s. 6d.
2521 & 2523 : 1966 Lead-based priming paints. 4s. 6d.
2524 : 1966 Red oxide-linseed oil priming paint. 4s.
2616 : 1966 Milk-can washing machines. 4s.
2690 : — Methods of testing water used in industry—
2690 : Part 3 : 1966 Silica and phosphate. 5s.
2745 : 1966 Bed pan and urine bottle washers. 4s. 6d.
2746 : 1966 PVC insulation and sheath of electric cables. 10s.
2791 : 1966 Aluminium conductors in insulated cables. 5s.
2842 : 1966 Whirling hygrometer (medium size). 4s. 6d.
3024 : 1966 Side scuttles for ships (A4 size). 30s.
3234 : 1966 Polythene insulation and sheath of electric cables. 6s.
3456 : — The testing and approval of domestic electrical appliances—
3456 : Section B3 : 1966 Mains-operated dry shavers. 5s.
3456 : Section B4 : 1966 Electric hairdryers. 4s. 6d.
3723 : 1966 Dividend and interest warrants and related tax vouchers 10s.

Amendments
Title
B.S.
37 : — Electricity meters—
Part 3 : 1953 Single-phase 2-wire prepayment meters. Amendment No. 1
78 : — Cast iron spigot and socket pipes (vertically cast) and spigot and socket fittings
Part 2 : 1965 Fittings. Amendment No. 1
148 : 1959 Insulating oil for transformers and switchgear.
Amendment No. 2
153 : — Steel girder bridges—
Parts 1 and 2 : 1958 Materials, workmanship, protection against atmospheric corrosion.
Materials and workmanship. Weighing, shipping, and erection. Amendment No. 5
Part 3 A : 1954 Loads. Amendment No. 3
Parts 3 B and 4 : 1958 Stresses. Design and construction. Amendment No. 7
196 : 1961 Plugs, socket-outlets, cable-couplers and appliance couplers with earthing contacts.
Amendment No. 2
308 : 1964 Engineering drawing practice. Amendment No. 1
450 : 1958 Machine screws and machine screw nuts (B.S.W. and B.S.F. threads). Amendment No. 1
697 : 1960 Rubber gloves for electrical purposes. Amendment No. 3
709 : 1964 Methods of testing fusion-welded joints and weld metal in steel. Amendment No. 1
743 : 1951 Materials for damp-proof courses. Amendment No. 2

THE NEW ZEALAND GAZETTE

Ref.
No.
PD
843 : 1964 Thermal-storage electric water-heaters (constructional and water requirements),
Amendment No. 1
864 : 1953 Capillary and compression fittings of copper and copper alloy for use with copper tube complying with B.S. 659 and B.S. 1386.
Amendment No. 3
903 : — Methods of testing vulcanized rubber
Part A2 : 1956 Determination of tensile-stress-strain properties. Amendment No. 9
Part A3 : 1956 Determination of tear strength. Amendment No. 3
Part A4 : 1957 Determination of compression stress-strain. Amendment No. 1
Part A5 : 1958 Determination of tension set. Amendment No. 1
Part A7 : 1957 Determination of hardness. Amendment No. 4
Part A9 : 1957 Determination of abrasion resistance. Amendment No. 2
Part A13 : 1960 Determination of resistance to low temperatures (rigidity modulus test). Amendment No. 1
Part A16 : 1956 Determination of swelling in liquids. Amendment No. 2
Part A19 : 1956 Accelerated ageing tests. Amendment No. 4
Part A20 : 1959 Determination of hardness (microtest). Amendment No. 2
Part C3 : 1956 Determination of permit-tivity and power factor. Amendment No. 2
1006 : 1961 Method for the determination of fastness to daylight of coloured textiles. Amendment No. 4
1016 : — Methods for the analysis of coal and coke—Part 13 : 1961 Test special to coke. Amend-ment No. 2
1104 : 1957 General purpose Acme screw threads. Amend-ment No. 2
1204 : — Synthetic resin adhesives (phenolic and amino-plastic) for wood—
Part 1 : 1964 Gap-filling adhesives. Amendment No. 2
Part 2 : 1965 Close-contact adhesives. Amendment No. 1
1224 : 1965 Electroplated coatings of nickel and Chromium. Amendment No. 1
1230 : 1955 Gypsum plasterboard. Amendment No. 2
1243 : 1964 Metal ties for cavity wall construction. Amendment No. 1
1246 : 1959 Metal skirtings, picture rails, and beads. Amendment No. 2
1290 : 1958 Wire rope slings and sling legs. Amendment No. 2
1310 : 1965 Coal tar pitches for building purposes. Amend-ment No. 1
1542 : 1960 Equipment for eye, face and neck protection against radiation arising during welding and similar operations. Amendment No. 3
1549 : Part 1 : 1949 Methods for sheet metal pattern development. Amendment No. 3
1560 : 1958 Steel pipe flanges and flanged fittings (nominal sizes ½ in. to 24 in.) for the petroleum industry. Amendment No. 3
1564 : 1949 Pressed-steel sectional tanks (rectangular). Amendment No. 1
1640 : — Steel butt-welding pipe fittings, for the petroleum industry—
Part 1 : 1962 Wrought carbon and ferritic alloy steel fittings. Amendment No. 1
Part 2 : 1962 Wrought and cast austenitic chromium-nickel steel fittings. Amend-ment No. 2
1768 : 1963 Unified precision hexagon bolts, screws, and nuts (UNC and UNF threads) normal series. Amendment No. 1
1877 : 1963 Domestic bedding, excluding cellular rubber bedding. Amendment No. 2
1891 : 1965 Sizes single-ply paper bags. Amendment No. 1
1952 : 1964 Copper alloy gate valves, for general purposes. Amendment No. 1
1953 : 1964 Copper alloy check valves, for general purposes. Amendment No. 1
2060 : 1964 Copper alloy screw-down stop valves, for general purposes. Amendment No. 1
2482 : 1963 Timber scaffold boards. Amendment No. 1
2560 : 1954 Exit signs for cinemas, theatres, and places of public entertainment. Amendment No. 2
2646 : 1955 Copper laboratory autoclaves. Amendment No. 1
2661-86 & 3661 : 1961 Methods for the determination of the colour fastness of textiles. Amendment No. 4
2693 : — Screwed studs—
Part 1 : 1956 General purpose studs. Amendment No. 2

1445

5785
5754
5694
5695
5696
5697
5693
5698
5699
5700
5701
5702
5703
5742
5768
5707
5734
5725
5720
5727
5692
5740
5755
5745
5776
5712
5714
5792
5746
5747
5706
5750
5769
5717
5718
5719
5733
5763
5771
5685
5722