314
THE NEW ZEALAND GAZETTE
No. 12

Licensing Takapuna City Council to Erect a Groyne at Castor Bay

———

PURSUANT to the Harbours Act 1950, the Minister of Marine hereby licenses and permits the Takapuna City Council (hereinafter called the licensee, which term shall include its successors or assigns unless the context requires a different construction), to use and occupy a part of the foreshore and bed of the sea as shown on plan marked M.D. 11940 and deposited in the office of the Marine Department at Wellington, for the purpose of maintaining thereon a groyne as shown on the said plan, such licence to be held and enjoyed by the licensee upon and subject to the terms and conditions set forth in the Schedule hereto.

———

SCHEDULE

CONDITIONS

1. This licence is subject to the Foreshore Licence Regulations 1960, and the provisions of those regulations shall, so far as applicable, apply hereto.
2. The term of the licence shall be one year from the 1st day of February 1966.
3. The annual sum so payable by the licensee shall be one pound (£1) ($2).

Dated at Wellington this 22nd day of February 1966.

W. J. SCOTT, Minister of Marine.

(M. 4/2665)

———

The Standards Act 1941—British Standards, Revisions, and Amendments Available for Comment

———

PURSUANT to subsection (3) of section 8 of the Standards Act 1941, notice is hereby given that the British standards, revisions, and amendments listed in the Schedule hereto are being considered for adoption as New Zealand standard specifications. All persons who may be affected by them and who desire to comment thereon may, on application, obtain copies on loan from the New Zealand Standards Institute, Bowen State Building, Bowen Street, or Private Bag, Wellington C. 1.

Requests should specify that copies are required for comment purposes.

The closing date for the receipt of comment is 25 March 1966.

Dated at Wellington this 28th day of February 1966.

R. J. SMITH
Acting Executive Officer, Standards Council.

(S.I. 114/2/1)

———

SCHEDULE

LIST OF BRITISH STANDARDS

New Issues
B.S.
Title

896 : —— Stretchers and stretcher carriers—
896 Part 2 : 1965 Performance.

978 : —— Fine pitch gears—
978 Part 5 : 1965 Hobs and cutters.

1722 : —— Fences—
1722 Part 11: 1965 Woven wood fences.

3474 : —— Quality of fillings for bedding, upholstery and domestic articles—
3474 Part 4 : 1965 Recleansed hair.

3594 : —— Pipe wrenches—
3594 Part 2 : 1965 Footprint-type wrenches.

3923 : —— Methods for ultrasonic examination of welds—
3923 Part 1 : 1965 Manual examination of circumferential butt welds in pipes.
3923 Part 3 : 1965 Manual examination of nozzle welds.

3934 : 1965 Dimensions of semiconductor devices.
3938 : 1965 Current transformers.
3940 : 1965 Classification for adhesives based on bitumen or coal tar.
3941 : 1965 Voltage transformers.
3942 : 1965 Marking of control settings on hearing aids.
3943 : 1965 Plastics waste traps.
3944 : 1965 Colour filters for theatre lighting and other purposes.
3945 : 1965 Sectional beams for warp-knitting machines.
3946 : 1965 Universal sprockets for 35 mm perforated film.
3947 : 1965 Liquid chlorine.
3948 : 1965 Cast iron parallel slide valves for general purposes.
3949 : 1965 Pre-beaming and weavers’ beams for jute yarns.
3950 : 1965 Electrical protective systems for a.c. plant.
3951 : 1965 Freight containers.
3952 : 1965 Cast iron butterfly valves for general purposes.
3953 : 1965 Synthetic resin bonded woven glass fabric laminated sheet.
3954 : 1965 Asbestos cement ducting.
3955 : —— Electrical controls for domestic appliances—
3955 Part 1 : 1965 General requirements.
3961 : 1965 Cast iron screw-down stop valves and stop and check valves for general purposes.

Revisions
B.S.
Title

842 : 1965 A.C. voltage-operated earth-leakage circuit-breakers.
874 : 1965 Methods of determining thermal properties, with definitions of thermal insulating terms.
907 : 1965 Dial gauges for linear measurement.
1562 : 1965 Agricultural mower and combine-harvester parts.
1578 : 1965 Rubbers for the dairy industry.
1967 : 1965 Broad tooth sprockets for 35 mm perforated film.
1978 : 1965 Bit braces.
3464 : 1965 Cast iron wedge and double disk gate valves for general purposes.

Amendments
B.S.
Title
Ref. PD No.

31 : 1940 Steel conduit and fittings for electrical wiring. Amendment No. 2
5663

196 : 1961 Plugs, socket-outlets, cable-couplers, and appliance-couplers with earthing contacts. Amendment No. 1
5664

781 : 1950 Wrought iron chain slings and rings, links alternative to rings, egg links, and intermediate links. Amendment No. 4
5662

872 : 1965 Abrasive papers and cloths (technical products). Amendment No. 1
5658

1870 : —— Safety footwear—
Part 1 : 1956 Leather safety boots and shoes. Amendment No. 10
5669

1877 : 1963 Domestic bedding, excluding cellular rubber bedding. Amendment No. 1
5680

2051 Part 4 : 1954 Steel nipple pipe fittings (for brazing) Unified threads and Unified hexagons. Amendment No. 3
5671

2455 : 1954 Methods of sampling and testing boiler water deposits. Amendment No. 2
5670

2491 : 1963 Domestic cooking appliances for use with liquefied petroleum gases. Amendment No. 3
5667

2618 : 1955 D.C. control equipment for electric traction. Amendment No. 1
5666

2621–5 : 1964 Glycerol (glycerine). Amendment No. 1
5660

2654 : —— Vertical mild steel welded storage tanks, with butt-welded shells, for the petroleum industry—
Part 2 : 1961 Site erection, inspection, and testing. Amendment No. 2
5668

2856 : 1957 Precise conversion of inch and metric sizes on engineering drawings. Amendment No. 1
5661

2883 : 1964 Domestic instantaneous and storage water heaters for use with liquefied petroleum gases. Amendment No. 1
5659

3283 : —— Non-reversible connectors and appliance inlets for portable electrical appliances (for circuits up to 250 volts)—
Part 1 : 1960 13A connector and appliance inlet. Amendment No. 3
5655

3474 : 1962 Quality of fillings for bedding, upholstery, and domestic articles, Parts 1–3. Amendment No. 2
5679

3561 : 1962 Non-domestic space heaters burning town gas. Amendment No. 1
5656

3804 : —— Methods for the determination of the calorific value of fuel gases—
Part 1 : 1964 Non-recording methods. Amendment No. 1
5653

3806 : 1964 Breathing machines for medical use. Amendment No. 1
5672

3884 : 1965 Machine tool unit construction. Amendment No. 1
5652

———

The Standards Act 1941—Amendment of Standard Specifications

———

PURSUANT to the Standards Act 1941 and regulations made thereunder, the Minister of Industries and Commerce, on 22 February 1966, amended the under-mentioned standard specifications by the incorporation of the amendments shown hereunder:

Number and Title of Specification
Amendment

NZSS 841:1964 Wood screws; being BS 1210:1963
No. 1 (PD 5467)

NZSS 1672:—— The use of high strength friction grip belts in structural steelwork—
Part 1: 1962 General grade bolts; being BS 3294:Part 1:1960
No. 2 (PD 5262)

NZSS 2074:1966 Surgical spring trusses; being BS 2930:1957
No. 1 (PD 3935)

NZSS 2076:1966 Metal surgical implants, drills and screwdrivers used for bone surgery; being BS 3531:1962
No. 1 (PD 5228)

Application for copies of the standard specifications so amended should be made to the N.Z. Standards Institute, Bowen State Building, Bowen Street, or Private Bag, Wellington C. 1. Copies of the amendments will be supplied, free of