1264
THE NEW ZEALAND GAZETTE
No. 43

FIRST SCHEDULE

THE access lane shall be marked as follows:

1. Marker buoys, either barrel, drum, or spherical in shape, painted orange with a vertical black stripe, each 50 yards apart, commencing 50 yards from the edge of the water, shall be suitably moored along each side of the access lane.

2. At high-water mark on the foreshore at each side of the access lane in line with the marker buoys there shall be placed a notice board, measuring not less than 2 ft 6 in. by 2 ft, painted white with black letters.

3. The aforesaid notice boards shall contain the following notice:

“NOTICE
Motor Launch Regulations 1962
Access lane through which motor launches and water skiers may pass at speeds greater than 5 miles per hour.
BATHERS KEEP OUT”

SECOND SCHEDULE

ALL that area of water at the eastern end of Brady’s Bay in the Pauatahanui Inlet, Porirua Harbour, bounded on the sides by parallel lines 65 yards apart extending in a north-north-west direction, with the westernmost boundary commencing at the telegraph pole 65 ft distant from the north-western corner of the corrugated-iron boatshed.

Dated at Wellington this 28th day of July 1965.

W. J. SCOTT, Minister of Marine.

(M. 3/13/508/7)

Declaring Areas for Operation of Motor Launches and Water Skiers

PURSUANT to the Motor Launch Regulations 1962, the Minister of Marine hereby declares that between the hours of 7.30 a.m. and 7.30 p.m. on Saturdays and Sundays and between 7 a.m. and 8 p.m. on the other days of the week, for a period of five years from the date of this notice, the area of water described in the First Schedule hereto shall not be subject to regulations 11 and 12 of the Motor Launch Regulations 1962.

FIRST SCHEDULE

ALL that area of water in the Waiau River between Lake Te Te Anau and Lake Manapouri.

Dated at Wellington this 28th day of July 1965.

W. J. SCOTT, Minister of Marine.

(M. 3/13/508/15)

The Standards Act 1941—Amendment of Standard Specifications

PURSUANT to the Standards Act 1941 and regulations made thereunder, the Minister of Industries and Commerce, on 27 July 1965, amended the under-mentioned standard specifications by the incorporation of the amendments shown hereunder:

Number and Title of Specification Amendment
NZSS 625:1950 Water taps (½ in. to 1 in.) ....... No. 3
NZSS 664:1950 Enamelled pressed steel kitchen sinks ....... No. 1
NZSS 794:1952 Earthenware roofing tiles ....... No. 1

Application for copies of the standard specifications so amended should be made to the N.Z. Standards Institute, Bowen State Building, Bowen Street, or Private Bag, Wellington C.1, or to the Government Bookshops at Auckland, Hamilton, Wellington, Christchurch, or Dunedin. Copies of the amendments will be supplied, free of charge, upon request.

Dated at Wellington this 28th day of July 1965.

V. FAIRHALL,
Acting Executive Officer, Standards Council.

(S.I. 114/2/3:1476–78)

The Standards Act 1941—Draft Amendment to the New Zealand Standard Specification for Arc Welding Plant and Equipment (NZSS 1250:1955)

PURSUANT to subsection (3) of section 8 of the Standards Act 1941, notice is hereby given that the above draft amendment is being circulated under the reference No. D 8371.

All persons who may be affected by this amendment and who desire to comment thereon may, on application, obtain copies free of charge from the New Zealand Standards Institute, Bowen State Building, Bowen Street, or Private Bag, Wellington C.1.

The closing date for receipt of comment is 20 August 1965.

Dated at Wellington this 29th day of July 1965.

V. FAIRHALL,
Acting Executive Officer, Standards Council.

(S.I. 114/2/8)

The Standards Act 1941—Amendment of Standard Specification

PURSUANT to the Standards Act 1941 and the regulations made thereunder, the Minister of Industries and Commerce on 29 July 1965, amended the under-mentioned standard specification by the incorporation of the amendment shown hereunder:

Number and Title of Specification: NZSS 735:1950 Sizes for cut and packed duplicating and typewriting papers.

Amendment: No. 1.

Application for copies of the standard specification so amended should be made to the N.Z. Standards Institute, Bowen State Building, Bowen Street, or Private Bag, Wellington C.1, or to the Government Bookshops at Auckland, Hamilton, Wellington, Christchurch, or Dunedin.

Copies of the amendment will be supplied, free of charge, upon request.

Dated at Wellington this 29th day of July 1965.

V. FAIRHALL,
Acting Executive Officer, Standards Council.

(S.I. 114/2/3:1479)

The Standards Act 1941—Amendment of Standard Specification

PURSUANT to the Standards Act 1941 and the regulations made thereunder, the Minister of Industries and Commerce on 29 June 1965, amended the under-mentioned standard specification by the incorporation of the amendment shown hereunder:

Number and Title of Specification: NZSS 648:1953 General methods for the testing of woven textiles.

Amendment: No. 2.

Application for copies of the standard specification so amended should be made to the N.Z. Standards Institute, Bowen State Building, Bowen Street, or Private Bag, Wellington C.1, or to the Government Bookshops at Auckland, Hamilton, Wellington, Christchurch, or Dunedin.

Copies of the amendment will be supplied, free of charge, upon request.

Dated at Wellington this 29th day of July 1965.

V. FAIRHALL,
Acting Executive Officer, Standards Council.

(S.I. 114/2/3:1464)

The Standards Act 1941—Draft New Zealand Standard Specification No. D 8360—Structural Grade Radiata and Corsican Pine Joists, Planks, Beams, Stringers, and Columns (Addendum to NZSS 169)

PURSUANT to subsection (3) of section 8 of the Standards Act 1941, notice is hereby given that the above-mentioned draft New Zealand standard specification is being circulated.

All persons who may be affected by this specification and who desire to comment thereon may, on application, obtain copies on loan from the New Zealand Standards Institute, Bowen State Building, Bowen Street, or Private Bag, Wellington C.1.

The closing date for the receipt of comment is 31 July 1966.

NOTE—This draft supersedes No. D 8246 of the same title.

Dated at Wellington this 30th day of July 1965.

V. FAIRHALL,
Acting Executive Officer, Standards Council.

(S.I. 114/2/8)

The Standards Act 1941—Draft Amendment to the New Zealand Standard Specification for Grades and Definitions of Joints and Cuts of Meat for Sale on the New Zealand Market (NZSS 681:1962)

PURSUANT to subsection (3) of section 8 of the Standards Act 1941, notice is hereby given that the above draft amendment is being circulated under the reference No. D 8375.

All persons who may be affected by this amendment and who desire to comment thereon may, on application, obtain copies free of charge from the New Zealand Standards Institute, Bowen State Building, Bowen Street, or Private Bag, Wellington C.1.

The closing date for receipt of comment is 24 August 1965.

Dated at Wellington this 2nd day of August 1965.

V. FAIRHALL,
Acting Executive Officer, Standards Council.

(S.I. 114/2/8)