1118
THE NEW ZEALAND GAZETTE
No. 42

person affected by the taking of the land should set forth in
writing any objection he may wish to make to the execution
of such works or to the taking of the land, not being an
objection to the amount of compensation, and send the
written objection, within 40 days from the first publication
of this notice, to the Minister of Works at Wellington.

———

SCHEDULE

WELLINGTON LAND DISTRICT

ALL that piece of land containing 8·6 perches situated in the
City of Lower Hutt, Wellington R.D., being part Section 39,
Hutt District; as the same is more particularly delineated
on the plan marked M.O.W. 18580 (S.O. 25697) deposited in
the office of the Minister of Works at Wellington, and there-
on coloured blue. (Being situated on the northern side of
Naenae Road and approximately 8 chains from the inter-
section of Waiwhetu and Naenae Roads.)

Dated at Wellington this 16th day of June 1964.

PERCY B. ALLEN, Minister of Works.

(H.C. 4/71/145; D.O. 32/34/1335)

———

Notice of Intention to Take Additional Land for a Public
School in Block IV, Pareora Survey District

———

NOTICE is hereby given that it is proposed, under the pro-
visions of the Public Works Act 1928, to take the
additional land described in the Schedule hereto for
a public school; and notice is hereby further given
that the plan of the land so required to be taken is deposited
in the post office at Pleasant Point and is there open for
inspection; and that all persons affected by the taking of
the said land should, if they have any objections to the
taking of such land, not being objections to the amount or
payment of compensation, set forth the same in writing
and send such written objections, within 40 days of the
first publication of this notice to the Minister of Works at
Wellington.

———

SCHEDULE

CANTERBURY LAND DISTRICT

ALL that piece of land containing approximately 2 roods 30·4
perches situated in Block IV, Pareora Survey District, Can-
terbury R.D., being part Lot 1, D.P. 5504, being part Rural
Section 9780, being back land adjoining the present Pleasant
Point District High School. Part certificate of title, Volume
461, folio 152, Canterbury Land Registry; as the same is more
particularly delineated on the plan marked M.O.W. 18554
(S.O. 10318) deposited in the office of the Minister of Works
at Wellington, and thereon edged orange.

Dated at Wellington this 16th day of June 1964.

PERCY B. ALLEN, Minister of Works.

(P.W. 31/1845; D.O. 40/9/37)

———

Licensing Francis Allan Wells and Noble Joseph Wells to Use
and Occupy a Part of the Foreshore at Wakatahuri Bay as
Sites for a Wharf, Boatshed, and Slipway

———

PURSUANT to the Harbours Act 1950, the Minister of Marine
hereby licenses and permits Francis Allan Wells and Noble
Joseph Wells, of Wakatahuri Bay (hereinafter called the
licensees, which term shall include their administrators,
executors, or assigns, unless the context requires a different
construction), to use and occupy parts of the foreshore at
Wakatahuri Bay, as shown on plans marked M.D. 4297, 10505,
and 9569 and deposited in the office of the Marine Department
at Wellington, for the purpose of maintaining thereon a wharf,
boatshed, and slipway, as shown on the said plan, such licence
to be held and enjoyed by the licensees upon and subject to
the terms and conditions set forth in the Schedule hereto.

———

SCHEDULE

CONDITIONS

1. This licence is subject to the Foreshore Licence Regula-
   tions 1960, and the provisions of those regulations shall, so far
   as applicable, apply hereto.

2. The premium payable by the licensees shall be five
   pounds (£5) and the annual sum so payable ten pounds (£10).

3. The term of the licence shall be 14 years from the 1st day
   of April 1964.

Dated at Wellington this 25th day of June 1964.

W. J. SCOTT, Minister of Marine.

(M. 4/74)

———

Specifications Declared to be Standard Specifications

———

PURSUANT to the Standards Act 1941 and the regulations made
thereunder, the Minister of Industries and Commerce, on 30
June 1964, declared the under-mentioned to be new and
revised sections of N.Z.S.S. 1490:1959 as under:

Number and Title of Specification
Price of Copy
(Post Free)
s. d.

N.Z.S.S. 1490:1959 Electric-valve bases, caps and
holders; being B.S. 448:1953.
(1) Section 6/1.7 (issue 2) (Top cap CT7
(recessed ball cap) .... .... .... 2 0
(2) Section 7/3 (issue 1) 5 and 7 lead-in-line
subminiature valveholders and associ-
ated gauges .... .... .... 3 0
(3) Section B4A containing: .... .... .... 2 0
B4A/1.1 (issue 1) B4A base.
B4A/1.2 (issue 1) B4A base pin and
water slot position gauge.
(4) Section B5E/1.2 (issue 1) B5E base pin
position gauge. .... .... .... 2 0
(5) Section B5F/1.1 (issue 2) B5F base .... 2 0
(6) Section B5K/1.1 (issue 1) B5K base .... 2 0
(7) Section B7G/1.1 (issue 2) B7G base .... 2 0
(8) Section B8A/1.1 and 1.3 containing: .... .... .... 2 0
B8A/1.1 (issue 2) B8A base.
B8A/1.3 (issue 2) B8A base pin
straightening tool.
(9) Section B8D/3 containing: .... .... .... 3 0
B8D/3.1 (issue 1) B8D valveholder.
B8D/3.2 (issue 1) B8D valveholder
sizing tool.
B8D/3.3 (issue 1) B8D valveholder
insertion and withdrawal force gauge.
(10) Section B8G containing: .... .... .... 2 6
B8G/1.1 (issue 2) B8G base.
B8G/1.2 (issue 2) B8G base pin and
spigot position gauge having square
pin holes.
(11) Section B9A/1.1 (issue 2) B9A base .... 2 0
(12) Section B9A/D containing: .... .... .... 3 0
B9A/D/1.1 (issue 1) B9A/D base.
B9A/D/1.2 (issue 1) B9A/D pin and
tubulation position gauge
B9A/D/1.3 (issue 1) B9A/D pin
straightening tool.
(13) Section B9D containing: .... .... .... 2 0
B9D/1.1 (issue 1) B9D base.
B9D/1.2 (issue 1) B9D base pin
position gauge.
(14) Section B11A/1.1 (issue 2) B11A base .... 2 0
(15) Section B12E/1.1 (issue 1) B12E base .... 2 0
(16) Section B12F containing: .... .... .... 2 0
B12F/1.1 (issue 1) B12F base.
B12F/1.2 (issue 1) B12F base pin
position gauge.
(17) Section B12J containing: .... .... .... 2 0
B12J/1.1 (issue 1) B12J base.
B12J/1.2 (issue 1) B12J base pin
position gauge.
(18) Section B14A/1.1 (issue 2) B14A base .... 2 0
(19) Section B23A containing: .... .... .... 2 0
B23A/1.1 (issue 1) B23A base.
B23A/1.2 (issue 1) B23A base pin posi-
tion gauge.
(20) Section B24A containing: .... .... .... 2 0
B24A/1.1 (issue 1) B24A base.
B24A/1.2 (issue 1) B24A base pin and
spigot position gauge.
(21) Section B26A containing: .... .... .... 3 0
B26A/1.1 (issue 1) B26A base.
B26A/1.2 (issue 1) B26A base pin
position gauge.
B26A/1.3 (issue 1) B26A base pin
straightening tool.

Application for copies should be made to the N.Z. Standards
Institute, Bowen State Building, Bowen Street, or Private Bag,
Wellington C.1.

Dated at Wellington this 2nd day of July 1964.

V. FAIRHALL,
Acting Executive Officer, Standards Council.

(S.I. 114/2/2:2499)