New Zealand Gazette – 1915 – No. 84

Page 2374

✨ Government Stores Tender Rates

2374

THE NEW ZEALAND GAZETTE.

[No. 84

SCHEDULE 7.—GENERAL IRONMONGERY—continued.

Item	Description.	Rate.	At per	Contractor.
No.
718	Tapes, measuring, $\frac{5}{8}$ in. wide, in case with flush handle— Chesterman's “Constantia,” No. 527 ..	6/	8/	Ashby, Bergh, and Co. (Ltd.), Christchurch.
719	Chesterman's metallic, No. 34, F.H.	6/	8/	Ditto.
720	Rabone's “Rigida,” No. 391 ..	5/9	7/6	“
721	Rabone's metallic, No. 401 ..	5/9	8/	“
722	Tapes, measuring, $\frac{5}{8}$ in. wide, without case— Chesterman's “Constantia,” No. 2801	5/	“	“
723	Chesterman's metallic, No. 126 ..	5/	“	“
724	Rabone's “Rigida,” No. 392 ..	3/6	“	“
725	Rabone's metallic, No. 404 ..	3/6	“	“
726	Tapes, measuring, all steel, marked on both sides (feet and inches and links), in case with flush handle— $\frac{3}{8}$ in. wide, Rabone’s No. 415	16/	“	“
727	$\frac{1}{2}$ in. wide, Rabone’s No. 418	21/	“	“
728	$\frac{5}{8}$ in. wide, Rabone’s No. 421	25/	“	“
738	Trucks, store, with outside wheels, Ames Plow Company— No. 1	27/6	“	“
739	No. 2	32/6	“	“
742	Tue-irons, complete with pipes— 14 in.	18/	“	E. Reece and Sons (Ltd.), Christchurch.
743	16 in.	21/	“	Ditto.
744	18 in.	24/	“	Ashby, Bergh, and Co. (Ltd.), Christchurch.
745	Tube, brass-cased, polished and lacquered, brazed joint, in lengths cut as required— $\frac{3}{8}$ in. ...	/4	ft.	Ditto.
746	$\frac{1}{2}$ in. ...	/4$\frac{1}{4}$	“	“
747	$\frac{5}{8}$ in. ...	/4$\frac{1}{2}$	“	“
748	$\frac{3}{4}$ in. ...	/5	“	“
750	1 in. ...	/8	“	“
751	1$\frac{1}{4}$ in.	/10	“	“
752	Tubes and fittings (see Pipes). Washers, iron, light, any size— $\frac{1}{4}$ in. to $\frac{7}{16}$ in.	/4	gross	“
753	$\frac{1}{2}$ in. to $\frac{11}{16}$ in.	/5	“	“
754	$\frac{3}{4}$ in. and $\frac{13}{16}$ in.	/9	“	“
755	$\frac{7}{8}$ in. and $\frac{15}{16}$ in.	1/	“	“
757	Washers, iron, heavy, any size	21/	cwt.	“
758	Wheels, barrow (and gudgeons), wrought iron— Flat tire, 16 in. x 1$\frac{1}{4}$ in.	6/	each	“
759	Flat tire, 18 in. x 1$\frac{1}{2}$ in.	7/	“	“
760	Wire, brass, hard-drawn— 10 to 20 gauge	1/	lb.	“
761	22 gauge	1/1	“	“
762	24 gauge	1/2	“	“
763	26 gauge	1/4	“	“
764	Wire, copper, soft— 10 to 20 gauge	1/1	“	“
765	22 gauge	1/2	“	“
766	24 gauge	1/3	“	“
767	26 gauge	1/4	“	“
776	Wire, lacing, galvanized, 14 to 20 gauge	37/4	cwt.	“
777	Wire, picture, gilt on copper— No. 5	1/	100 ft.	“
778	No. 6	1/6	“	“
779	No. 7	2/	“	“