New Zealand Gazette – 1914 – No. 31

Page 1302

✨ Accepted Tender-Rates for Stores

1302

THE NEW ZEALAND GAZETTE.

[No. 31

No.	Description of Article & Rate.	Per	Tenderer.
324	Brass-cased tubing, polished and lacquered—
$\frac{3}{8}$ in. diameter .. .. .. .. .. ..	$/2\frac{1}{2}$	ft.	68 E. Buxton & Co. (Ltd.).
325	$\frac{1}{2}$ in. diameter .. .. .. .. .. ..	$/2\frac{3}{4}$	,,
326	$\frac{5}{8}$ in. diameter .. .. .. .. .. ..	/4	,,
327	$\frac{3}{4}$ in. diameter .. .. .. .. .. ..	/5	,,
328	$\frac{7}{8}$ in. diameter .. .. .. .. .. ..	/6	,,
329	1 in. diameter .. .. .. .. .. ..	$/7\frac{1}{4}$	,,
330	1$\frac{1}{4}$ in. diameter .. .. .. .. .. ..	/9	,,
332	Bricks, bath .. .. .. .. .. ..	2/	.doz.
401	Cement, Portland, English*.. .. .. .. ..	13/	barrel
	Chain, proved, short link, self colour, Admiralty or Lloyd's test (proof certificate to be furnished if required), J. G. Walker and Son's Best—
408	$\frac{3}{16}$ in. .. .. .. .. .. ..	32/6	cwt.
409	$\frac{1}{4}$ in. .. .. .. .. .. ..	30/	,,
410	$\frac{5}{16}$ in. .. .. .. .. .. ..	29/	,,
411	$\frac{3}{8}$ in. .. .. .. .. .. ..	26/	,,
412	$\frac{1}{2}$ in. .. .. .. .. .. ..	25/	,,
413	$\frac{5}{8}$ in. .. .. .. .. .. ..	25/	,,
432	Chalk, lump, free from dust .. .. .. ..	8/	,,
	Chisels, cast steel, registered, carpenters', ash-handled, with two bright iron ferrules, round shank, William Marples and Sons, No. 601—
435	$\frac{1}{2}$ in. .. .. .. .. .. ..	7/6	doz.
436	$\frac{3}{4}$ in. .. .. .. .. .. ..	10/6	,,
437	1 in. .. .. .. .. .. ..	12/	,,
438	1$\frac{1}{4}$ in. .. .. .. .. .. ..	14/	,,
439	1$\frac{1}{2}$ in. .. .. .. .. .. ..	16/	,,
440	1$\frac{3}{4}$ in. .. .. .. .. .. ..	18/	,,
441	2 in. .. .. .. .. .. ..	24/	,,
COACH-SCREWS.

Black, Square Heads, Ordinary Sharp Points.
Horton and Son (Limited), Darlaston, “ Alma ” brand.
Length from under Head to Point. | Per Gross. | Per Cwt. |
| --- | --- | --- |
| | Diameter. | Diameter. |
| | $\frac{1}{4}”$ | $\frac{5}{16}”$ | $\frac{3}{8}”$ | $\frac{7}{16}”$ | $\frac{1}{2}”$ & $\frac{9}{16}”$ | $\frac{5}{8}”$ & $\frac{11}{16}”$ | $\frac{3}{4}”$tol$\frac{1}{4}”$ |
| 2 in. and under .. .. | 5/6 | 6/6 | 7/6 | — | — | — | — |
| 2$\frac{1}{4}$ in. to 3 in. inclusive .. | Advancing | — | — | — | — | — |
| Above 3 in. to 4$\frac{1}{2}$ in. inclusive | 1s. per gross | Per Cwt. | 32/ | — | — |
| Above 4$\frac{1}{2}$ in. to 6 in. inclusive | per $\frac{1}{2}$ in. or fraction of | 35/ | 33/ | 32/ | — | — |
| Above 6 in. .. .. | $\frac{1}{2}$ in. over | 35/ | 33/ | 32/ | — | — |
| | 2 in. long | | | | |
|
| * See Conditions of Contract for specification.
|
|