β¨ Building Regulations
130
from the foundation to the top thereof
without any corbelling over whereby any
part of the brickwork, stone, or cement
concrete of such chimney shall overhang
any lower part thereof.
-
Every chimney, shaft, or flue, here-
after built, raised, or repaired, must be
carried up in brick or stonework, or
cement concrete work, all round, at least
four inches thick, to a height of not less
than thirty-six inches above the highest
part of such portion of the roof, flat, or
gutter adjoining thereto, measured at the
point of junction; and as to any chimney
shaft (except that of a steam engine, brewery,
distillery, or manufactory) the brick or
stonework of such shaft or flue must not
be built higher than eight feet above the
slope, flat, or gutter of the roof which it
adjoins, measured from the highest point
of junction, unless such chimney be built
of increased thickness, or be built with
or bonded to another chimney shaft, or
be otherwise rendered secure; and as to
the chimney shaft for the boiler furnace
of any steam engine, or for any brewery,
distillery, or manufactory, such shaft may
be erected of any height, so that it is
built in such manner and of such strength
and dimensions as shall be satisfactory to
the Surveyor, upon special application in
each case to the City Council. -
Every oven, furnace, close fire, or
forge, for the purpose of trade or manufacture, must be six inches at the least
distant from any party wall, and must not
be upon or within eighteen inches of any
timber or woodwork, and the floor on or
above which such oven, furnace, or close
fire, or forge, shall be built or fixed must
be formed and paved under the same, and
for a distance of two feet all round the
same, with stone, brick, tile, slate, or
concrete, at the least two inches thick, or
with other proper incombustible non-
conducting materials. Every detached
stove set or fixed in any building, shall
be fixed subject to the requirements in
this section, with the stove pipe leading
into a brick, stone, or Portland cement
concrete flue. -
No chimney, shaft, jamb, breast, or
flue already built, or hereafter to be
built, shall be cut into for any purpose
whatsoever without the consent of the
Surveyor having been first obtained to
the proposed alterations.
Footings.
- The footings of all walls, public or
private, abutting on any street line, must
be built up to the surface of the ground
with stone or brick set in mortar or
cement, or with concrete, in such a
manner as to produce solid work, and the
bottom course of all footings for brick
or stone walls must be at least 8Β½ inches
wider than the walls standing thereon.
Party Walls.
- All party walls must be built wholly
of bricks set in mortar or cement, and
bonded with hoop iron, or of stone, or
cement concrete, and every such wall
must be carried up to the full thickness
specified in Schedule A.
External Walls.
-
All external walls (unless specially
exempted by these regulations) must be
either of brick, stone, or cement concrete,
or of timber covered with corrugated iron
of not less gauge than No. 26; but no
such timber and iron wall shall be erected
nearer than nine inches from any boundary
line other than the frontage to a
street, or the property of the owner of
the building; nor shall any other building
be erected nearer than eighteen inches
from any wall of the like construction, or
built of combustible materials having such
timber and iron walls. -
Whenever it may become necessary
to enter upon the premises of any adjoining
owner or occupier, for the purpose of
effecting repairs to any external wall or
portion of any building, it shall be lawful
for the owner or occupier of any such
building, after giving six clear days notice
in writing to the owner or occupier of
the adjoining premises, and depositing
with the Town Clerk such sum as the
Surveyor shall, by writing under his hand,
certify to be necessary as security, wholly
or in part, for any damage the adjoining
property may sustain by reason of the
execution of the repairs, to enter upon the
adjoining premises, and continue a reasonable time in order to execute the necessary
work. Provided that any damage the
adjoining owner or occupier may sustain
in consequence thereof, shall be assessed
by the Surveyor, and made good or compensated for by the owner or occupier so
repairing; and such compensation shall
be defrayed wholly, or in part, as the case
may be, out of the moneys deposited with
the Town Clerk as security for such
damages; and in case the amount so
deposited shall be insufficient to meet the
whole damage sustained, the balance shall
be recovered by the party sustaining
damage; or if the amount deposited shall
exceed the actual damage, then the balance shall be refunded to the depositor. -
The external walls of any building
hereafter erected, may be finished with
projecting eaves, instead of a parapet:
provided that such external walls be
distant at least fifteen feet from any
boundary line, and shall, in all respects,
excepting as to foundations adjoining
footpaths, be exempt from these regulations.
Projections.
- Projections from buildings such as
base course piers, columns, pilasters, door
and window dressings, dressing strings,
fascias, copings, parapets, blocking
courses, plinths, or other architectural
decorations, forming part of an external
wall, shall not project beyond the street
line, except cornices, entablatures, or
Next Page →
β¨ LLM interpretation of page content
ποΈ
Building regulations for Wellington City
(continued from previous page)
ποΈ Provincial & Local GovernmentBuilding regulations, City Building Surveyor, Wellington City Council, Chimneys, Footings, Party Walls, External Walls, Projections
Wellington Provincial Gazette 1873, No 16